Panduit FS2EPKFLNNFM002 OM4+ Fiber Patch Cord Lc Ofnp

Product Description

The PANDUIT FS2EPKFLNNFM002 is a 2-fiber OM4+ multimode fiber optic patch cord with a 1.6mm duplex cable and keyed LC connectors on both ends. Rated OFNP (Optical Fiber Nonconductive Plenum), this patch cord meets the fire safety requirements for installation in plenum air-handling spaces. The polished PC (Physical Contact) connector finish minimizes back-reflection and insertion loss, making it appropriate for high-density data center and enterprise structured cabling environments. Network technicians and low-voltage cabling contractors are the typical installers for this type of assembly.

This patch cord is suited for OM4+ multimode optical networks operating at 10G, 40G, and 100G data rates across short to moderate link spans. The OFNP plenum rating makes it a direct fit for above-ceiling and raised-floor pathway installations where air-handling plenum compliance is required by local codes. Keyed LC connectors prevent cross-connection errors in high-density patch panels and active equipment ports, reducing polarity mistakes during moves, adds, and changes in structured cabling systems.

Key Features

• OM4+ multimode fiber grade supports 10G, 40G, and 100G transmission
• OFNP plenum-rated jacket meets NFPA 90A and NEC Article 770 requirements for air-handling spaces
• Keyed LC connectors reduce polarity errors in high-density patching environments
• PC polished end-face finish minimizes insertion loss and back-reflection
• 1.6mm duplex cable diameter suitable for high-density routing in cable management systems
• Factory-terminated and tested assembly for plug-and-play deployment

Compatibility

Designed as an OEM-style patch cord for OM4+ multimode fiber optic structured cabling systems using keyed LC-to-LC duplex connections in plenum-rated pathways.

Installation Notes

Installation should be performed by a qualified low-voltage cabling technician in accordance with NEC Article 770 and applicable local codes. De-energize or power down active equipment ports before connecting or disconnecting fiber patch cords to avoid potential damage to optical transceivers. Do not bend the cable below its minimum bend radius during routing, and avoid placing the cord under mechanical stress or pinch points. Inspect and clean LC connector end-faces before mating to ensure rated optical performance.