Panduit F92EPKCLCSCM002 OS2 Duplex Fiber Patch Cable

Product Description

The PANDUIT F92EPKCLCSCM002 is an OS2 singlemode duplex fiber optic patch cable designed for structured cabling and data network applications. Built with a 1.6mm duplex construction and polished connectors, this cable provides low-loss signal transmission suited to high-bandwidth, long-distance runs in commercial and enterprise environments. It features LC connectors on one end and SC connectors on the other, making it a practical cross-connect solution between panels, switches, and transceivers. Licensed electricians, network technicians, and low-voltage cabling contractors are the typical installers for this category of fiber hardware.

This patch cable is intended for use in OFNP-rated (plenum) cable pathways, meeting the fire resistance requirements for air-handling spaces in commercial buildings. It is suited to horizontal and backbone cabling runs in data centers, enterprise LANs, telecom rooms, and structured cabling installations where OS2 singlemode fiber is specified. The duplex configuration supports full-duplex transmission over a two-fiber strand, and the 1.6mm jacket diameter keeps bend radius and bulk manageable in congested cable trays and patch fields.

Key Features

• OS2 singlemode fiber optimized for low-loss, long-distance data transmission
• Duplex 2-fiber construction supports full-duplex communication in a single cable assembly
• 1.6mm jacket diameter reduces bulk in high-density patch panels and trays
• OFNP plenum-rated jacket meets fire code requirements for air-handling spaces
• LC to SC connector pairing enables cross-connection between mismatched port types
• Polished connectors (PC) reduce back-reflection and insertion loss at mated interfaces

Compatibility

Designed as an OEM-style replacement and standard patch solution for OS2 singlemode fiber installations using LC and SC interface ports in plenum-rated structured cabling environments.

Installation Notes

Installation should be performed by a qualified low-voltage cabling technician or licensed electrician familiar with fiber optic handling procedures. Power down any active transceivers or SFP modules before mating or removing fiber connectors to prevent eye hazard from live laser sources. Observe minimum bend radius specifications for the 1.6mm duplex jacket to avoid microbend losses. Plenum pathway installations must comply with applicable local building and fire codes, including NFPA 70 (NEC) Article 770 requirements for optical fiber cabling.