Panduit F62ELLNSNSNM009 OM1 Duplex Fiber Patch Cable

Product Description

The PANDUIT F62ELLNSNSNM009 is an OM1 multimode duplex fiber optic patch cable designed for structured cabling installations in commercial and industrial environments. Built with a 1.6mm diameter duplex construction and LC duplex connectors on both ends, this cable uses a Physical Contact (PC) polish on its ferrules to minimize back reflection and insertion loss. The Low Smoke Zero Halogen (LSZH) jacket makes it suitable for plenum-adjacent and enclosed spaces where smoke toxicity and halogen off-gassing are a concern. Licensed network installers and data center technicians are the primary installers of this cable type.

This patch cable is used in OM1 62.5-micron multimode fiber optic networks, typically found in legacy data center backbone runs, campus LAN environments, and horizontal cabling segments. It connects patch panels, switches, media converters, and fiber optic transceivers using standard LC duplex ports. The LSZH jacket material meets fire safety requirements in ventilation spaces and enclosed cable pathways common in European and international building codes, as well as applicable North American installations where LSZH is specified.

Key Features

• OM1 62.5-micron multimode fiber supports legacy and short-distance network links
• LC duplex connectors on both ends for standard LC-to-LC patch applications
• Physical Contact (PC) ferrule polish reduces back reflection at connection points
• 1.6mm duplex jacket provides a compact, manageable cable form factor
• Low Smoke Zero Halogen (LSZH) jacket reduces toxic gas emission in enclosed spaces
• 2-fiber duplex construction supports full-duplex transmit and receive simultaneously

Compatibility

Designed as an OEM-style replacement or direct-install patch cable for OM1 multimode fiber optic systems using LC duplex port interfaces.

Installation Notes

Installation should be performed by a qualified network or low-voltage cabling technician familiar with fiber optic handling procedures. Bend radius minimums must be observed during routing to avoid signal degradation or fiber damage. Inspect and clean LC ferrules before mating to ensure low insertion loss. Do not exceed the rated minimum bend radius or apply tension that could stress the fiber strands inside the jacket.