Osg 8595232 Screw Machine Drill Bit 0.0913 in Hss

Product Description

The OSG 8595232 is a screw machine length drill bit designed for high-performance drilling in metalworking applications. Built from high speed steel with a coated finish, it measures 0.0913 inches (2.32 mm) in diameter and features a 130-degree faceted point angle with web thinning for easier penetration and reduced thrust. The straight-cylindrical shank measures 3.00 mm in diameter, and the overall length is approximately 1.77 inches (45.00 mm), making it compact and rigid for short-hole drilling in production environments. Licensed machinists, tool and die technicians, and CNC operators are the primary users of this bit.

The OSG 8595232 is suited for drilling into steel, stainless steel, aluminum, aluminum alloy, and aluminum silicate. Its screw machine length profile provides extra rigidity compared to jobber-length bits, making it a practical choice for drill press, turret lathe, and CNC machining center applications where hole placement accuracy and tool stability are critical. The 5xD flute-to-diameter ratio supports chip evacuation in short, blind, or through-hole operations at production volumes.

Key Features

• 0.0913-inch (2.32 mm) diameter with a tolerance of +0 to -0.014 mm for consistent hole sizing
• 130-degree faceted point angle reduces walking and improves entry on flat and curved surfaces
• Web-thinned tapered web lowers cutting thrust and extends tool life in harder materials
• High speed steel construction with coated finish for improved wear resistance
• Screw machine length body provides enhanced rigidity over jobber-length equivalents
• Right-hand spiral flute design promotes efficient chip clearing during drilling

Compatibility

Designed as an OEM-style replacement and standard production drill bit for use in screw machine, drill press, and CNC machining applications requiring a 0.0913-inch diameter screw machine length bit.

Installation Notes

Installation and use should be performed by qualified machinists or tool technicians familiar with cutting tool handling and machine tool operation. Secure the shank fully in the chuck or collet and verify runout before drilling. Power down and de-energize all equipment before changing tooling. Do not exceed the recommended feed and speed parameters for the workpiece material to avoid premature tool wear or breakage.