Osborn 0002241200 Wheel Brush 8 in Crimped Nylon 80 Grit

Product Description

The OSBORN 0002241200 is a crimped nylon wheel brush designed for surface finishing, deburring, and blending applications. Measuring 8 inches in outside diameter with a 7/8-inch face width and a 2-inch arbor hole mount, this brush mounts directly to a bench grinder or arbor-drive machine. The fill material is nylon loaded with silicon carbide abrasive at 80 grit, giving it moderate cutting action suitable for cleaning, light material removal, and surface prep on metal, wood, or composite substrates. Rated to 4,500 RPM maximum, it delivers consistent performance at standard machine speeds. Installation requires no additional shank hardware. Trade professionals and industrial maintenance techs will find this brush suited to production and repair environments alike.

This wheel brush is appropriate for use in metal fabrication shops, maintenance facilities, and general industrial settings. The 80-grit silicon carbide fill makes it effective on ferrous and non-ferrous metals as well as harder non-metallic surfaces. The crimped wire configuration allows the bristles to flex, which is useful for reaching irregular contours and avoiding excessive material removal on finished or semi-finished workpieces. The 2-inch arbor hole accommodates common bench grinder and arbor press spindle sizes found in most shop environments.

Key Features

• 8-inch outside diameter with 7/8-inch face width for broad surface contact
• Crimped nylon fill with silicon carbide abrasive at 80 grit
• 2-inch arbor hole for standard bench grinder and arbor-drive compatibility
• 4,500 RPM maximum speed rating
• 1.5-inch trim length for consistent bristle engagement
• No encapsulation and no shank included — arbor mount only

Compatibility

Designed for use with arbor-drive machines and bench grinders fitted with a 2-inch spindle or arbor. No specific OEM machine compatibility is stated by the manufacturer for this part.

Installation Notes

Installation is performed by a qualified machine operator or maintenance technician. Always power down and lockout/tagout the machine before mounting or removing the brush. Verify the machine spindle speed does not exceed 4,500 RPM before operation. Inspect the brush for damage before each use and ensure the arbor nut is secured to the spindle per the machine manufacturer's specifications.