Osborn 0002241000 Wheel Brush 6 in Nylon 180 Grit

Product Description

The OSBORN 0002241000 is a 6-inch diameter wheel brush designed for surface finishing, deburring, and blending applications. It uses crimped nylon fill material loaded with silicon carbide abrasive at 180 grit, delivering consistent scratch patterns and controlled material removal on metal, composite, and hard surfaces. The brush mounts via a 2-inch arbor hole and is rated to 6,000 RPM. With a face width of 0.875 inches and a trim length of 1.0625 inches, it fits standard bench grinder and pedestal grinder arbor setups. Installation and operation are typically handled by machinists, maintenance technicians, and fabricators.

This wheel brush is suited for bench grinder and pedestal grinder applications in metalworking shops, maintenance facilities, and fabrication environments. The 180-grit silicon carbide abrasive nylon fill makes it appropriate for fine surface conditioning, light deburring, and finish blending on ferrous and non-ferrous metals as well as harder plastics and composites. It is a direct arbor-hole mount style with no shank included, intended for fixed grinding station use rather than portable tool applications.

Key Features

• 6-inch outside diameter with 0.875-inch face width for broad contact coverage
• Crimped nylon fill with 180-grit silicon carbide abrasive for controlled surface conditioning
• 2-inch arbor hole fits standard bench and pedestal grinder spindles
• 6,000 RPM maximum rated speed
• 1.0625-inch trim length provides consistent brush action throughout service life
• No encapsulation and no shank — arbor hole mount only

Compatibility

Designed for use on bench grinders and pedestal grinders fitted with a 2-inch arbor. No specific compatible machine models were identified in the product data.

Installation Notes

Installation should be performed by a qualified machinist or maintenance technician familiar with abrasive wheel mounting procedures. Always power down and lock out the grinder before mounting or removing the brush. Confirm the machine spindle speed does not exceed the 6,000 RPM maximum rating of the brush before operation. Follow applicable ANSI B11 and OSHA abrasive wheel safety standards for guarding and eye protection.