Oregon Tool S52 Advancecut 14 in Chainsaw Chain

Product Description

The OREGON TOOL S52 is a 14-inch semi-chisel chainsaw chain built for smooth, efficient cutting on small to mid-sized saws. The hard chrome outer layer protects the cutters and extends service life, while hardened rivets reduce wear and minimize the need for frequent chain adjustments. This is a low-kickback, low-vibration design that helps reduce operator fatigue during extended cutting sessions. The chain runs on a 3/8-inch pitch with a .050-inch gauge, making it compatible with a wide range of chainsaw brands. The built-in Lubri-Tec automatic oiling system delivers oil to critical chain components, reducing downtime and maintenance frequency. Licensed HVAC techs, plumbers, and electricians are not the audience here — this chain is installed by landscapers and arborists working with saws up to 42 cc.

The S52 is suited for residential and light commercial landscaping applications where a 14-inch bar is the standard setup. The precision heat-treated semi-chisel cutters maintain a higher tolerance for debris — dirt, embedded grit, and small stones — compared to full-chisel designs. This makes the chain a practical choice for landscapers, property maintenance crews, and knowledgeable homeowners who work in conditions where wood cleanliness cannot be guaranteed. It is designed for use with narrow kerf bars only, and should always be paired with a narrow kerf bar to maintain proper cutting geometry and safe operation.

Key Features

• Hard chrome cutter layer resists wear and extends chain service life
• Low-kickback, low-vibration design reduces operator fatigue during prolonged use
• Semi-chisel cutters handle debris-contaminated wood better than full-chisel profiles
• Built-in Lubri-Tec automatic oiling system lubricates key chain components during operation
• Hardened rivets minimize stretch and reduce adjustment frequency
• Meets ANSI standards for chainsaw chain safety

Compatibility

Fits all chainsaw brands configured for 3/8-inch pitch and .050-inch gauge. Intended for saws up to 42 cc displacement with 14-inch bars. Must be used with narrow kerf designed bars only.

Installation Notes

Chain installation and tensioning should be performed by a qualified operator following the saw manufacturer's service guidelines. Always power down and disconnect the spark plug before handling or replacing the chain. Wear cut-resistant gloves when handling chainsaw chain. Verify bar groove width matches the .050-inch gauge before installation, and confirm bar and sprocket pitch match the 3/8-inch chain pitch.

Technical Specifications

• Bar Length: 14 inches
• Chain Pitch: 3/8 inch
• Gauge: .050 inch (1.3 mm)
• Cutter Style: Semi-chisel
• Cutter Material: Hard chrome steel
• Oiling System: Lubri-Tec automatic oiling
• Max Engine Displacement: 42 cc
• Safety Rating: ANSI compliant, low-kickback
• Weight: 0.519 pounds
• Sold As: Each

Standard Information

• Brand: OREGON TOOL
• Manufacturer Part Number: S52