Olympic/ppg 79551A/01 Semi-transparent Oil Stain Cedar 1 Gal

Product Description

The OLYMPIC/PPG ARCHITECTURAL FIN 79551A/01 is a semi-transparent, oil-based exterior stain formulated for decks, fences, and siding. This cedar-toned, white-base product uses a urethane-fortified formula to deliver a durable, penetrating finish on exterior wood surfaces. It incorporates Water Guard Plus protection to resist moisture intrusion, Advance Sunblock UV protection to slow weathering and color fade, and a Scuff Guard formula to hold up under foot traffic. At 37.36 pounds per case of four gallons, each gallon covers standard exterior wood applications. This product is 100% VOC compliant in all areas of the United States and is suited for professional application by painters, remodelers, and exterior finishing contractors.

This stain is designed for exterior horizontal and vertical wood surfaces including residential decks, privacy fences, and wood lap or board siding. The semi-transparent finish allows natural wood grain to show through while providing protective color. The white base is formulated to accept mixing into all Maximum Solid Colors, giving applicators flexibility across job sites. It is best applied to clean, dry, and properly prepared bare or lightly weathered wood surfaces in conditions appropriate for oil-based coatings.

Key Features

• Urethane-fortified oil formula for durable penetrating protection on exterior wood
• Water Guard Plus technology resists moisture penetration on decks and siding
• Advance Sunblock UV protection reduces color fade and wood weathering
• Scuff Guard formula adds surface toughness for deck foot-traffic areas
• Creates the brand maximum mildew-resistant coating rating in this product line
• 100% VOC compliant in all U.S. regions
• White base supports mixing into all Maximum Solid Colors

Compatibility

Designed for use on exterior bare or lightly weathered wood surfaces including decks, fences, and wood siding. White base is compatible with all Maximum Solid Colors in the Olympic Maximum line per manufacturer formulation guidelines.

Installation Notes

Applied by professional painters or qualified contractors familiar with oil-based exterior coating procedures. Power down or disconnect any electrical fixtures in the immediate work area before surface preparation. Wood surfaces must be clean, dry, and free of previous failing coatings before application. Follow all local and federal guidelines for oil-based product handling, ventilation, and disposal of rags or applicators, which may present a spontaneous combustion hazard.