Occunomix LUX-SSG/FR-OM Hi-vis Safety Vest Medium Ansi 2

Product Description

The OCCUNOMIX LUX-SSG/FR-OM is a flame-resistant high visibility safety vest designed for workers operating in environments with both traffic exposure and arc flash or flash fire risk. Built to ANSI Class 2 standards and compliant with ASTM F1506, this vest delivers the retroreflective coverage required on job sites where conspicuity is mandatory. The 2-inch silver reflective stripe runs horizontally across the body, providing 360-degree visibility in low-light conditions. The hook-and-loop front closure allows quick donning and doffing, and a single pocket provides basic tool or document storage. It is worn by electricians, utility workers, road crews, and other trades requiring simultaneous high-visibility and flame-resistant protection.

This vest is suited for residential and commercial job sites where NFPA 70E compliance is required alongside ANSI 107-2015 high-visibility standards. It carries an arc thermal performance value (ATPV) of 5.4 cal per square cm, placing it in NFPA 70E Hazard Risk Category 1. Typical installation scenarios include electrical utility work, highway construction, and industrial maintenance where workers face both vehicular traffic and incidental arc flash exposure. The solid orange background fabric meets ANSI 107-2015 background material requirements for Class 2 garments.

Key Features

• ANSI Class 2 compliant per ANSI 107-2015 for high-visibility applications
• Flame-resistant construction rated to ASTM F1506 with ATPV of 5.4 cal per square cm
• NFPA 70E Hazard Risk Category 1 rated for arc flash protection
• 2-inch silver horizontal reflective stripe for retroreflective visibility
• Hook-and-loop front closure for fast, tool-free wear adjustments
• Single pocket for small tool or documentation storage

Compatibility

Designed as an ANSI Class 2 high-visibility garment for trade professionals requiring concurrent flame-resistant and high-visibility PPE in medium sizing.

Installation Notes

This garment is a personal protective equipment item worn by qualified workers — no installation trade license is required, but selection must comply with the site safety plan and applicable NFPA 70E, OSHA 1910.269, or DOT high-visibility requirements. Inspect the vest before each use for damage to reflective striping, fabric integrity, or closure function. Flame-resistant garments must not be worn over non-FR base layers that extend beyond the FR outer layer, as this can reduce overall arc protection. Follow the manufacturer wash and care instructions to maintain FR and reflective performance ratings.