Oatey 22017 Lead Free Plumbing Solder 95/5 1 Pound

Product Description

The OATEY 22017 is a lead free wire solder formulated with a 95 percent tin and 5 percent antimony alloy, designed for professional plumbing applications. It carries a melting range of 450 degrees F to 464 degrees F and comes in a 0.117 inch diameter wire on a 1 pound spool. This solder is the go-to choice for joints that will face repeated thermal cycling, vibration, or mechanical stress. It meets the requirements of the Safe Water Drinking Act, making it suitable for potable water supply systems. Licensed plumbers and pipefitters reach for this alloy when standard 50/50 or 60/40 solders are not appropriate for the service conditions.

The OATEY 22017 is most commonly used in residential and light commercial plumbing installations where copper tubing joints are exposed to frequent and extreme temperature swings or vibration. Typical applications include hot and cold water supply lines, boiler piping, and heating system connections where joint integrity under thermal stress is a primary concern. The lead free formula makes it compliant for use on potable water systems in jurisdictions that enforce lead free soldering requirements.

Key Features

• Lead free 95/5 tin-antimony alloy rated for potable water systems under the Safe Water Drinking Act
• Melting range of 450 degrees F to 464 degrees F for consistent, controlled joint formation
• 0.117 inch diameter wire provides good flow and workability on standard copper fittings
• Engineered to resist joint failure caused by thermal cycling, vibration, and mechanical movement
• Comes in a 1 pound spool for jobsite and shop use

Compatibility

Designed for use with copper tubing and fittings in plumbing systems requiring a lead free solder that meets Safe Water Drinking Act compliance standards.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and the International Plumbing Code (IPC). Shut off the water supply and depressurize the line before soldering. Ensure all pipe and fitting surfaces are clean, dry, and properly fluxed before applying heat. Do not use this solder as a substitute for silver-bearing brazing alloys in high-pressure refrigeration or gas line applications.