Oasis Ts4p-6030r Wht Abf Bottom Tub Shower Bottom 60x30

Product Description

The OASIS ts4p-6030r wht abf bottom is a replacement tub and shower bottom section from the VURSA kd Series, designed for four-piece modular tub and shower systems with a right-hand end drain configuration. Constructed from fiberglass composite with a sanitary-grade white gelcoat finish, this base measures 60 inches in length by 30 inches in width and holds up to 40 gallons. It features a 17.25-inch ABF apron, a 2-inch drain opening with 3 inches of drain clearance, and a 2.5-inch overflow opening. This unit is the tub and shower bottom section only. Wall sections, enclosures, plumbing, installation hardware, and all other components are sold separately. Licensed plumbers and remodel contractors are the primary installers.

This base is suited for residential remodel applications where the existing four-piece tub and shower system requires a replacement bottom. The right-hand drain placement is a fixed design element and must match the rough-in drain location on site. The unit drops into floor-mounted installations and pairs with compatible VURSA kd Series wall panels. The bathing well measures 51 inches in length by 20 inches in width by 13.25 inches in height. Verify all rough-in dimensions and drain location before ordering, as this base is not interchangeable with left-hand or center-drain configurations.

Key Features

• Fiberglass composite construction with white gelcoat surface for durability and cleanability
• Right-hand end drain with a 2-inch drain opening and 3 inches of drain clearance
• 2.5-inch overflow opening positioned 15 inches above the floor
• 17.25-inch ABF apron for standard alcove or remodel installation
• Contoured neck rest, corner accessory ledge, and textured non-slip floor surface
• 40-gallon water capacity bathing well sized at 51 inches x 20 inches x 13.25 inches

Compatibility

Designed as a replacement bottom section for the OASIS VURSA kd Series four-piece 60-inch by 30-inch tub and shower system with a right-hand drain configuration.

Installation Notes

Installation should be performed by a licensed plumber familiar with IPC drain and overflow rough-in requirements. Power down any adjacent electrical circuits and shut off the water supply before beginning removal of the existing base. Confirm that the floor structure is level and capable of supporting the unit and its filled water capacity prior to setting the base. Wall sections and all trim components must be sourced separately and installed per the manufacturer assembly sequence for the four-piece system.