Nsi Industries wakj14b Plastic Anchor Kit 100 Pack

Product Description

The NSI INDUSTRIES wakj14b is a plastic anchor kit designed for fastening into masonry, concrete, and similar hard substrates. The kit includes 100 red plastic anchors sized at 1/4 inch, 100 pan-head combination-drive screws in a 10 x 1 inch dimension, and one 1/4 inch masonry drill bit. Electricians, HVAC installers, and general contractors use kits like this when securing conduit straps, junction boxes, equipment mounting brackets, or other hardware to block, brick, or poured concrete walls. The complete kit eliminates the need to source anchors, screws, and the matching drill bit separately.

This anchor kit suits residential and light commercial applications where fasteners must penetrate masonry or concrete surfaces. It is commonly used when mounting electrical enclosures, low-voltage device brackets, pipe hangers, or HVAC equipment supports to block or brick walls. The red 1/4 inch anchors accept the included 10 x 1 inch pan-head screws, providing a snug mechanical fit once the anchor expands in the drilled hole. The included masonry drill bit is sized to match the anchor diameter, making it a self-contained fastening solution for field work.

Key Features

• 100 red plastic anchors sized at 1/4 inch for masonry and concrete applications
• 100 pan-head combination-drive screws, 10 x 1 inch, matched to anchor size
• One 1/4 inch masonry drill bit included for correctly sized pilot holes
• Self-contained kit eliminates the need to source components separately
• Pan-head combo drive accepts both flathead and Phillips drivers for field flexibility

Compatibility

Designed as a general-purpose 1/4 inch plastic anchor fastening solution for masonry, concrete block, and brick substrates in residential and light commercial installations.

Installation Notes

Installation is typically performed by licensed electricians, HVAC technicians, or plumbers during equipment mounting. De-energize any circuits in the work area before drilling near electrical systems. Use the included 1/4 inch masonry drill bit at the correct drill speed for the substrate, and clear debris from the hole before seating the anchor. Fastener installations in structural or load-bearing applications should comply with applicable local building codes.

Technical Specifications

• Anchor Size: 1/4 inch
• Screw Size: 10 x 1 inch
• Screw Head Type: Pan Head Combination Drive
• Anchor Color: Red
• Anchor Quantity: 100
• Screw Quantity: 100
• Drill Bit Included: 1/4 inch Masonry Drill Bit, 1 piece
• Anchor Material: Plastic

Standard Information

• Brand: NSI INDUSTRIES
• Manufacturer Part Number: wakj14b