Norton 78072762837 Abrasive Belt 80 Grit 1.5x60 in Ceramic

Product Description

The NORTON 78072762837 is a ceramic-grain coated abrasive belt engineered for demanding stock removal and surface finishing applications. Measuring 1.5 inches wide by 60 inches long, it carries an 80-grit, medium-grade ceramic abrasive applied in a closed-coat pattern over a heavy Y-weight polyester cloth backing. The ceramic grain is self-sharpening under pressure, delivering consistent cut rates across the belt's life. This belt suits stationary and portable belt sanders used by metalworking professionals, fabricators, welders, and industrial maintenance technicians handling aggressive material removal tasks on ferrous and non-ferrous metals.

This belt is appropriate for use on stationary floor-model belt grinders, pedestal sanders, and handheld portable belt sanders that accept a 1.5 x 60 inch belt. The R983 series ceramic construction performs well in both wet and dry grinding conditions, making it a practical choice for shops running coolant or water to reduce heat buildup in metal grinding operations. Typical applications include weld seam blending, deburring, edge finishing, and aggressive material removal where aluminum oxide belts wear prematurely.

Key Features

• Ceramic abrasive grain provides self-sharpening cutting action for extended belt life on hard metals
• Closed-coat construction maximizes abrasive coverage for fast, consistent stock removal
• Y-weight polyester cloth backing resists tearing under high-tension belt sander operation
• Rated for both wet and dry operation, compatible with water or coolant-assisted grinding
• 80 grit medium grade balances aggressive cut with acceptable surface finish for weld blending and deburring
• Part of the R983 series, designed for heavy-duty industrial and fabrication use

Compatibility

Designed to fit belt sanders and grinders accepting a 1.5 x 60 inch abrasive belt. Suitable for both wet and dry grinding configurations on ferrous and non-ferrous workpieces.

Installation Notes

Installation is performed by the equipment operator or maintenance technician following the belt sander manufacturer's belt-change procedure. Power down and disconnect the sander from its power source before replacing the belt. Verify belt tracking tension and guard placement before resuming operation. Always wear appropriate hand and eye protection when handling and operating abrasive belts.