Norton 78072756534 Abrasive Belt 60 Grit 1/4x24 in

Product Description

The NORTON 78072756534 is a coated abrasive belt designed for aggressive material removal in grinding and finishing operations. Built on the R983 series platform, it uses ceramic alumina as the abrasive material, which self-sharpens under pressure to maintain consistent cut rates longer than standard aluminum oxide belts. At 60 grit, this belt falls in the coarse grade range, making it well-suited for stock removal, weld blending, and surface conditioning on metals and other hard materials. The closed coat density maximizes abrasive coverage per square inch, delivering faster cutting action. The polyester Y-weight backing provides the stiffness and tear resistance required for demanding wet or dry applications.

This belt measures 1/4 inch wide by 24 inches long, a narrow-profile size commonly used in file belt sanders, detail grinders, and handheld power file tools. It is suited for reaching tight contours, inside radii, and narrow channels where wider belts cannot make contact. Typical applications include metalworking shops, fabrication facilities, and maintenance operations that require precision deburring or surface prep in confined areas. The belt supports both wet and dry operation, giving the technician flexibility depending on the workpiece material and cooling requirements.

Key Features

• Ceramic alumina abrasive self-sharpens under load for extended belt life
• 60 grit coarse grade for efficient stock removal and weld blending
• Closed coat construction maximizes abrasive density for faster cutting
• Polyester Y-weight backing resists tearing under high-tension narrow-belt use
• Rated for both wet and dry operation
• Narrow 1/4 inch by 24 inch profile fits file belt sanders and detail power files

Compatibility

Designed for use in file belt sanders and narrow-profile abrasive power tools that accept 1/4 inch wide by 24 inch long belts. Verify tool drive and idler wheel specifications before installation.

Installation Notes

Installation is typically performed by machinists, fabricators, or maintenance technicians. Power down and unplug the tool before mounting or removing the belt. Inspect the belt for cracks, fraying, or delamination prior to use and do not exceed the tool manufacturer's rated operating speed. Eye protection and appropriate PPE are required when operating coated abrasive belts.