Norton 78072728957 Abrasive Belt 60 Grit 6x60 in Zirconia

Product Description

The NORTON 78072728957 is a coated abrasive belt designed for aggressive material removal on metal, weld seams, and fabricated surfaces. Built on a polyester cloth backing with a closed-coat zirconia alumina grain, this belt delivers consistent cut rate and extended life under both wet and dry operating conditions. At 60 grit, it falls in the coarse grade range, making it well suited for rapid stock removal, weld blending, and surface conditioning before finishing steps. It measures 6 inches wide by 60 inches long and weighs 0.6 pounds. The R823P series construction is engineered to resist grain pullout and backing failure during high-pressure contact wheel and platen grinding applications.

This belt is intended for use on stationary and portable belt grinders common in metal fabrication shops, welding operations, and structural steel work. It handles ferrous and non-ferrous metals and is compatible with wet grinding setups where coolant is applied to reduce heat and extend abrasive life. Dry use is equally supported. Trades that routinely work with this belt include metal fabricators, ironworkers, maintenance machinists, and industrial maintenance technicians performing surface prep ahead of coating or inspection.

Key Features

• 60 grit coarse grade for fast stock removal and aggressive surface conditioning
• Zirconia alumina abrasive material provides high cut rate and long service life on metal
• Closed-coat construction maximizes grain density across the belt face for consistent scratch pattern
• Polyester cloth backing resists tearing and flexing under sustained contact pressure
• Rated for both wet and dry operation, compatible with coolant-assisted grinding setups
• R823P series construction engineered for demanding fabrication and weld blending applications

Compatibility

Designed as a replacement or production-run coated abrasive belt for stationary and portable belt grinders accepting a 6 inch by 60 inch belt size. Verify drive wheel and tracking system clearances before installation.

Installation Notes

Belt grinding equipment must be powered down and locked out before changing belts. Inspect the contact wheel, platen, and idler for wear or damage before mounting a new belt. Ensure the belt is oriented with the arrow or seam direction matching the drive rotation marked on the machine. Personal protective equipment including eye protection and gloves is required when handling coated abrasive belts and operating belt grinders.