Norton 78072727122 Abrasive Belt 60 Grit 2x60 Inches

Product Description

The NORTON 78072727122 is a coated abrasive belt designed for aggressive material removal on metal, weld seams, and fabricated components. Built on a polyester cloth backing, it uses zirconia alumina abrasive in a closed-coat configuration for consistent cut and long belt life. At 60 grit, this belt falls in the coarse range, making it well suited for rapid stock removal, deburring, and heavy-scale grinding. Weighing approximately 0.5 pounds, it is part of the R821P series, a line engineered for demanding grinding and finishing operations in industrial and trade environments. Licensed tradespeople and fabrication shop technicians are the primary users.

This belt is intended for use on stationary or portable belt grinders and sanders in dry operation only. The 2-inch width and 60-inch length fit a common range of industrial belt grinder configurations used in metal fabrication shops, pipe grinding, and structural steel work. The coarse 60-grit rating makes it appropriate for initial-pass material removal before stepping down to finer grits for finishing. It is not designed for wet or flood-coolant applications.

Key Features

• Zirconia alumina abrasive for aggressive cut rate and extended service life
• Closed-coat configuration delivers consistent surface contact and uniform material removal
• Polyester cloth backing provides flexibility and tensile strength under high-speed grinding loads
• 60-grit coarse grade optimized for rapid stock removal and weld seam grinding
• Dry-use rated — no coolant or water exposure required or recommended
• R821P series construction for demanding industrial grinding applications

Compatibility

Designed as an OEM-style replacement or consumable fit for belt grinders and portable belt sanders accepting a 2-inch by 60-inch abrasive belt in dry-operation configurations.

Installation Notes

Belt grinder installation should be performed by a qualified technician familiar with the grinder manufacturer's belt-change procedure. Always power down and disconnect the machine from its power source before removing or installing abrasive belts. Verify belt tracking and tension according to the grinder's specifications before resuming operation. Wear appropriate PPE, including eye protection and gloves, when handling abrasive belts and operating grinding equipment.