Norton 78072726988 Abrasive Belt 80 Grit 1.5x60 in

Product Description

The NORTON 78072726988 is a coated abrasive belt designed for aggressive material removal on metal, fabricated components, and other hard surfaces. Built on a heavyweight polyester cloth backing with an X-weight designation, this belt handles the tension and flex demands of high-pressure belt grinding and finishing applications. The zirconia alumina abrasive grain is closed-coat and rated at 80 grit, placing it in the medium grade range — well suited for stock removal, weld blending, and surface conditioning where a balance between cut rate and surface finish is required. The belt measures 1.5 inches wide and 60 inches long and is rated for both wet and dry operation.

This belt is a common choice in metal fabrication shops, welding operations, and maintenance environments where stationary or portable belt grinders are in regular use. The R823P series construction is designed to resist heat buildup and grain breakdown under sustained contact with ferrous and non-ferrous metals. Wet operation capability allows for coolant use to extend belt life and reduce workpiece heat when working with heat-sensitive alloys or achieving tighter surface finish tolerances.

Key Features

• Zirconia alumina grain delivers fast, consistent cut on metal and hard materials
• Closed-coat construction maximizes grain density for aggressive stock removal
• Heavyweight polyester cloth (X-weight) backing resists tearing under high tension and flex
• Rated for both wet and dry operation for versatile shop use
• 80 grit medium grade balances cut rate with surface finish quality
• 1.5 x 60 inch size fits a wide range of stationary and portable belt grinders

Compatibility

Designed as a replacement or consumable abrasive belt for belt grinders and finishing machines that accept a 1.5 inch wide by 60 inch long belt configuration.

Installation Notes

Installation is performed by metalworkers, fabricators, or maintenance technicians following the belt grinder manufacturer's belt-change procedure. Always power down and disconnect or de-energize the grinder before removing or installing a belt. Verify belt tracking adjustment after installation and run the machine briefly at low load before full-pressure operation. Inspect the belt for cracks, delamination, or tears before each use and replace if damage is found.