Norton 78072723692 Abrasive Belt 6 in 50 Grit Aluminum Oxide

Product Description

The NORTON 78072723692 is a coated abrasive belt designed for aggressive material removal on belt sanders and stationary grinding equipment. Built with aluminum oxide abrasive grain on an open coat construction, this belt runs at 50 grit — a coarse grade suited for rapid stock removal, weld blending, and surface preparation on wood, metal, and composite materials. The open coat layout reduces loading and helps the belt shed swarf, extending usable life in applications where clogging is a common problem. At 0.02 pounds, the belt is lightweight and straightforward to swap during production runs.

This belt is appropriate for both shop and field use wherever a 6-inch wide belt sander or abrasive finishing machine is employed. Typical applications include rough shaping and dimensioning of wood stock, deburring and grinding of fabricated metal parts, and preparation of surfaces prior to finishing or coating. The coarse 50 grit rating makes it best suited for initial passes where fast material removal is the priority rather than fine surface finish. Metalworking shops, woodworking operations, and general fabrication environments are the primary use settings.

Key Features

• 50 grit coarse grade for fast, aggressive stock removal
• Aluminum oxide abrasive material — durable and suitable for wood and metal
• Open coat construction reduces loading and extends belt life
• 6-inch belt width fits standard wide belt and bench sander configurations
• Coated abrasive type for consistent cut rate across the belt surface

Compatibility

Designed as a replacement or consumable coated abrasive belt for belt sanders and abrasive machines that accept a 6-inch wide belt format. Verify the required belt length against your machine specifications before ordering, as this input does not specify belt length.

Installation Notes

Belt installation should be performed with the machine fully powered down and unplugged. Confirm the arrow printed on the belt backing aligns with the direction of drum rotation before tensioning. Worn or cracked platens and contact wheels should be inspected and replaced before mounting a new belt. Follow the equipment manufacturer guidelines for tracking adjustment and belt tension to avoid premature failure.