Norton 78072722680 Abrasive Belt 36 Grit 6x60 in

Product Description

The NORTON 78072722680 is a coated abrasive belt designed for aggressive material removal in belt sanding and grinding applications. Running at 36 grit in the extra coarse grade range, this belt is built for rapid stock removal on metal, wood, and similar workpiece materials. It features an aluminum oxide abrasive on a closed-coat, X-weight cloth backing — a combination that delivers durability and consistent cut under load. At 6 inches wide and 60 inches in overall length, it fits standard wide-belt sanders and industrial floor machines. This belt is rated for dry operation only and belongs to the Norton R228 series.

This belt is suited for industrial and trade environments where fast material removal is the priority. Typical applications include weld seam grinding, heavy surface conditioning, and aggressive stock removal on metal fabrication or woodworking equipment. The X-weight cloth backing handles high-tension and high-pressure sanding operations without tearing or delaminating. The closed-coat construction maximizes abrasive surface coverage, which increases cut rate on harder materials. It is commonly installed on stationary wide-belt sanders and drum-type machines used in metal shops, fabrication facilities, and cabinet shops.

Key Features

• 36 grit extra coarse grade for aggressive, high-speed stock removal
• Aluminum oxide abrasive provides consistent cut and long service life on metal and wood
• Closed-coat construction maximizes abrasive coverage for higher cut rates
• X-weight cloth backing resists tearing under high tension and pressure
• Dry-use rated — not suitable for wet grinding or coolant-flood operations
• Norton R228 series construction for reliable dimensional consistency belt to belt

Compatibility

Designed as a direct-fit abrasive belt for stationary belt sanders and wide-belt machines accepting a 6-inch by 60-inch belt. Verify machine contact wheel diameter and platen size before installation.

Installation Notes

Belt installation should be performed by qualified personnel familiar with the sanding or grinding equipment. Power down and lockout the machine fully before removing a worn belt or installing a new one. Check the belt tracking arrow printed on the backing and orient the belt in the correct direction of travel before tensioning. Inspect the contact wheel, idler, and platen for wear or damage before running a new belt.