Norton 78072722555 Abrasive Belt 150 Grit 6x48 in

Product Description

The NORTON 78072722555 is a coated abrasive belt designed for dry grinding, blending, and finishing applications on belt sanders and stationary abrasive machines. Built on an X-weight polyester cloth backing, this belt delivers the rigidity and durability required for aggressive stock removal and controlled surface finishing. At 150 grit, it falls in the fine grade range, making it well suited for final shaping passes and surface prep before coating or finishing. The closed coat density ensures consistent abrasive coverage across the full belt face, promoting uniform scratch patterns and reducing loading on softer materials.

This belt is sized at 6 inches wide by 48 inches in overall length, fitting a wide range of floor-standing and benchtop belt grinders and sanders common in fabrication shops, maintenance facilities, and trade work environments. The R228 series designation indicates a general-purpose aluminum oxide construction intended for dry use on ferrous metals, wood, composites, and similar materials. Tradespeople and fabricators typically reach for this grit range when smoothing welds, refining contours, or prepping surfaces before primer or protective coating application.

Key Features

• 150 grit fine grade aluminum oxide abrasive for controlled surface finishing
• X-weight polyester cloth backing resists tearing and flexing under load
• Closed coat density provides full abrasive coverage and consistent scratch pattern
• Dry operation only — not rated for wet or coolant-flooded applications
• Series R228 general-purpose coated abrasive construction
• 6 inches x 48 inches belt size fits standard wide belt and bench sander configurations

Compatibility

Designed as a standard coated abrasive replacement belt for 6 inch by 48 inch belt sanders and abrasive finishing machines used in metal fabrication, woodworking, and general maintenance trades.

Installation Notes

Installation is performed by qualified machine operators or maintenance technicians familiar with belt sander equipment. Always power down and lock out the machine before changing the belt. Confirm belt tracking direction — most belts have a recommended run direction marked on the backing — and verify the belt is seated properly on all contact wheels and platens before restarting. Inspect the platen and contact wheel for wear before installing a new belt.