Norton 78072722075 Abrasive Belt 180 Grit 4x36 Aluminum Oxide

Product Description

The NORTON 78072722075 is a coated abrasive belt designed for dry material removal on belt sanders and finishing machines used in trade and industrial environments. Running 4 inches wide by 36 inches long, this belt carries a 180-grit aluminum oxide abrasive on an X-weight polyester cloth backing. The X-weight backing provides firm support and resistance to tearing under sustained pressure. Closed-coat density means the abrasive grains cover the full surface, delivering consistent stock removal and a uniform finish on metal, wood, and composite materials. HVAC sheet metal fabricators, plumbers working with copper and steel fittings, and general trade shops use this belt for deburring, surface prep, and fine finishing passes.

This belt fits standard 4 inch by 36 inch belt sander platforms common in trade shops and light industrial settings. The R228 series designation indicates NORTON's aluminum oxide dry-use coated line, suited for ferrous and non-ferrous metals, wood, and painted surfaces. At 180 grit, it falls in the fine-grade range, making it appropriate for final smoothing, light material removal, and pre-finishing surface preparation rather than aggressive stock removal.

Key Features

• 180-grit aluminum oxide abrasive for fine-grade surface finishing
• X-weight polyester cloth backing resists tearing under load
• Closed-coat construction delivers consistent, uniform abrasion across the full belt surface
• Dry-use rated — not suitable for wet or coolant-flooded applications
• R228 series coated belt, 4 inches wide by 36 inches long

Compatibility

Designed as a direct-fit replacement for standard 4 inch by 36 inch belt sander machines used in trade shop and light industrial applications.

Installation Notes

Installation is performed by a machine operator or maintenance technician following the belt sander manufacturer's belt-change procedure. Power down and disconnect the sander from its power source before removing or installing any belt. Confirm belt tracking adjustment after installation and run the sander briefly without load to verify proper seating before resuming work. Inspect the belt for tears or edge fraying before each use and replace if damage is found.