Norton 78072718704 Abrasive Belt 60 Grit 1/2x18 in

Product Description

The NORTON 78072718704 is a coated abrasive belt designed for aggressive material removal in grinding and finishing applications. Built on a heavy-duty Y-weight polyester backing, this belt delivers the rigidity and durability needed for high-pressure, high-speed operations. The abrasive material is ceramic alumina, a self-sharpening grain that fractures during use to expose fresh cutting edges, maintaining cut rate over the life of the belt. At 60 grit, this is a coarse-grade belt suited to rapid stock removal on metal, weld blending, and surface preparation work. Measuring 1/2 inch wide by 18 inches long, it fits compact belt grinders and file belt tools commonly used in fabrication and maintenance shops.

This belt is a strong fit for metal fabrication, tool and die, maintenance and repair, and industrial finishing environments. Its closed-coat construction maximizes abrasive coverage across the belt face, making it most effective on hard metals and materials where loading is not a primary concern. The belt supports both wet and dry operation, giving operators flexibility depending on their equipment setup and workpiece requirements. HVAC sheet metal work, pipe fitting, and structural steel prep are all typical use cases for a belt of this size and grit.

Key Features

• Ceramic alumina grain self-sharpens during use, sustaining cut rate longer than conventional aluminum oxide
• 60 grit coarse grade for rapid stock removal and weld blending
• Y-weight polyester backing resists tearing under high belt tension and contact pressure
• Closed-coat construction maximizes abrasive grain density across the belt face
• Wet and dry operation compatible for use with or without coolant
• 1/2 x 18 inch size fits compact file belt grinders and narrow-contact-wheel machines

Compatibility

Designed for use on belt grinders and file belt tools that accept 1/2 inch wide by 18 inch long abrasive belts. Verify drive and idler wheel diameter specifications on the host machine before installation.

Installation Notes

Belt installation should be performed by a qualified operator following the equipment manufacturer's guidelines. Power down and lockout/tagout the grinder before changing belts. Confirm the arrow printed on the belt backing matches the direction of machine travel before tensioning. Inspect the belt for cracks, tears, or delamination before each use and replace any damaged belt immediately.