Norton 69957398020 Abrasive Belt 80 Grit Ceramic Alumina

Product Description

The NORTON 69957398020 is a coated abrasive belt designed for aggressive material removal on metal, wood, and composite surfaces. Measuring 1/2 inch wide by 12 inches long, it runs on standard small-diameter belt sanders and file belt tools common in fabrication and finishing shops. The abrasive grain is ceramic alumina, a self-sharpening material that cuts faster and lasts longer than conventional aluminum oxide under load. At 80 grit, this belt falls in the coarse range, making it well suited for stock removal, weld blending, and surface conditioning prior to finer finishing passes. The Y-weight polyester backing handles both wet and dry operation, giving operators flexibility depending on material and process requirements.

This belt fits applications in metal fabrication, tool and die, maintenance and repair, and general industrial grinding. The closed-coat construction ensures consistent scratch patterns and efficient swarf removal during heavy cutting. Wet or dry operation makes it compatible with coolant-assisted grinding setups as well as dry bench work. Tradespersons in welding, HVAC ductwork fabrication, pipe fitting, and sheet metal work will find this belt useful for deburring, edge prep, and surface smoothing.

Key Features

• Ceramic alumina grain for fast, self-sharpening cuts on hard metals
• 80 grit coarse grade optimized for stock removal and weld blending
• Y-weight polyester backing resists tearing and flex fatigue under load
• Closed-coat construction delivers consistent scratch pattern and surface finish
• Rated for both wet and dry operation for process flexibility
• Part of the R980P series for performance grinding applications

Compatibility

Designed as an OEM-style replacement or standard-fit belt for 1/2 inch by 12 inch belt sander and file belt tool configurations commonly used in fabrication and industrial maintenance.

Installation Notes

Install and replace abrasive belts only with the tool unplugged or locked out per applicable OSHA lockout/tagout procedures. Confirm the belt tracking and tension are set correctly before operating at full speed. Inspect the belt for tears or edge fraying before each use. Personal protective equipment including eye protection and gloves is required during installation and operation.