Norton 66261194551 Blaze Cross Pad 120 Grit 3x3x1 in

Product Description

The NORTON 66261194551 is a Blaze Cross sanding pad designed for aggressive material removal and consistent surface finishing in professional grinding and prep applications. The pad measures 3 inches long by 3 inches wide by 1 inch thick, with a 1/4 inch - 20 threaded eyelet for secure mounting to compatible backing plates. Built with ceramic alumina abrasive on an 8-ply cotton backing, this medium-grade 120 grit pad delivers durability and cut consistency across repeated use cycles. It is well suited for fabricators, metalworkers, and finishing tradespeople who require a reliable coated abrasive pad for demanding surface prep work.

This cross pad configuration is commonly used in die grinder or right-angle grinder applications where access to contoured or irregular surfaces is required. The 120 grit rating places it in the medium-grade range, appropriate for blending welds, removing light stock, and preparing metal surfaces before coating or finishing. The 1/4 inch - 20 eyelet size is a standard thread for sanding pad mandrels widely used across the trade. The cotton backing provides flexibility to conform to workpiece geometry without sacrificing pad integrity under load.

Key Features

• Ceramic alumina abrasive for high cut rate and extended pad life
• 120 grit medium grade suitable for blending, deburring, and surface prep
• 8-ply cotton backing offers durability and surface conformability
• 1/4 inch - 20 threaded eyelet fits standard sanding mandrels
• 3 x 3 x 1 inch cross pad format accesses contoured and hard-to-reach areas

Compatibility

Designed as a coated abrasive cross pad for use with standard 1/4 inch - 20 threaded sanding mandrels compatible with die grinders and right-angle grinders accepting that thread size.

Installation Notes

Thread the pad eyelet onto a compatible 1/4 inch - 20 mandrel and tighten securely before operation. Ensure the grinder or rotary tool is disconnected from power before mounting or removing the pad. Do not exceed the maximum RPM rating of the mandrel or tool being used. Inspect the pad for wear, tears, or delamination before each use and replace if damage is found.