Norton 66261150076 Air Disc Sander 22000 Rpm 2 Inch

Product Description

The NORTON 66261150076 is a pneumatic handheld disc sander designed for high-speed surface finishing and material removal in professional trade and fabrication environments. Running at 22,000 RPM on a 90 psi air supply, this tool accepts 2 inch sanding discs through a 1/4 inch collet and directs exhaust air to the rear, keeping the work area clear of debris during operation. At 0.45 horsepower and 2.1 pounds, it is built for sustained single-hand use in tight spaces. Installation and finishing tradespeople, auto body technicians, and metal fabricators are the primary users.

This disc sander is suited for spot sanding, weld prep, paint removal, and finish blending on metal, wood, composites, and similar surfaces. The compact 2 inch pad diameter allows access to contoured surfaces and confined work areas where larger tools cannot reach. It is appropriate for both shop and field use wherever a compressed air supply at 90 psi is available. The rear exhaust design is particularly useful when working overhead or in enclosed spaces.

Key Features

• 22,000 RPM free speed for fast material removal and fine finishing
• 2 inch pad diameter accepts standard 2 inch sanding discs
• 1/4 inch collet inlet connects to standard shop air fittings
• Rear exhaust directs airflow away from the operator and work surface
• 0.45 HP pneumatic motor operates at 90 psi supply pressure
• Lightweight at 2.1 pounds for reduced fatigue during extended use

Compatibility

Designed for use with 2 inch sanding discs. Connects to compressed air systems via a 1/4 inch air inlet fitting.

Installation Notes

This tool is installed and operated by metalworkers, fabricators, body technicians, and finishing tradespeople familiar with pneumatic hand tools. Before connecting to an air supply, verify the line pressure does not exceed the rated 90 psi and that the air supply is dry and filtered to prevent moisture damage to the motor. Always inspect the sanding disc for damage before use and ensure it is fully seated in the collet. Disconnect the air supply before changing discs or performing any maintenance.