Norton 66261136592 Abrasive Disc 6 in 180 Grit Aluminum Oxide

Product Description

The NORTON 66261136592 is a 6-inch diameter abrasive disc designed for precision surface finishing in trade and industrial applications. Built on an X-weight cloth backing, this disc delivers the stiffness and durability needed for aggressive stock removal and consistent finish quality. The 180-grit aluminum oxide abrasive produces a fine-grade cut, making it well suited for final-pass sanding, blending, and surface preparation before coating or finishing. The flexible construction allows the disc to conform to slightly contoured surfaces without losing abrasive contact. At 3 pounds per unit, the disc is solidly constructed for repeated use in demanding shop environments.

This disc is used in metalworking, woodworking, and general fabrication settings where a fine, controlled finish is required. Typical applications include surface blending on ferrous and non-ferrous metals, wood sanding, and prep work prior to painting or coating. The aluminum oxide abrasive is a general-purpose grain appropriate for use on steel, aluminum, and hardwood. The cloth backing makes it a strong choice when fiber discs would be too aggressive or paper-backed discs would not hold up to the workload.

Key Features

• 6-inch diameter fits standard disc sanders and angle grinder backing pads
• 180-grit fine-grade aluminum oxide abrasive for controlled surface finishing
• X-weight cloth backing provides rigidity and resistance to tearing under load
• Flexible construction allows contact on mildly contoured surfaces
• Brown disc color; no vacuum holes for use on solid backing pads
• Part of the NORTON R228 series

Compatibility

Designed for use with standard 6-inch disc sander platens and angle grinder backing pads that accept resin-bonded cloth fiber or disc-style abrasives without vacuum hole requirements.

Installation Notes

Mounting is performed by qualified shop technicians or tradespeople familiar with abrasive tool operation. Ensure the sander or grinder is powered off and unplugged before mounting or removing a disc. Verify that the backing pad diameter matches the 6-inch disc diameter and that the pad is rated for the operating RPM of the tool. Do not exceed the maximum RPM rating of the disc or the backing pad.