Norton 662611-01490 Garnet Sandpaper Full Sheet 150A Grit

Product Description

The NORTON 662611-01490 is a full-sheet garnet abrasive paper designed for hand sanding and block sanding applications in woodworking, finishing, and surface preparation trades. Measuring 9 inches by 11 inches in the standard full-sheet format, this sheet uses an open-coat construction to resist loading and clogging when working with soft woods, paints, or resinous materials. The 150A grit rating places this sheet in the fine range, suited for intermediate to finish-stage sanding passes. Compatible with the A511, A513, and A514 garnet paper product lines, these sheets are sold and managed in bulk quantities of 100 sheets per packaging unit.

This abrasive sheet is used in residential and light commercial finishing environments. Typical applications include bare wood sanding between coats of stain or primer, smoothing filler compounds, and preparing surfaces ahead of topcoat application. The open-coat garnet backing minimizes grain burial on softer substrates, extending sheet life on materials prone to loading. Woodworkers, finish carpenters, painters, and drywall finishers commonly keep 150A grit full sheets on hand for consistent finish-stage work.

Key Features

• Open-coat construction reduces loading and extends sheet life on soft woods and paint
• 150A fine grit for finish-stage and between-coat sanding passes
• Standard 9 inches by 11 inches full-sheet format fits most hand sanding blocks and folding applications
• Garnet abrasive mineral provides a consistent cut on wood and soft substrates
• Compatible with A511, A513, and A514 garnet paper series
• Packaged in 100-sheet bulk units for shop and job-site stocking

Compatibility

Compatible with NORTON A511, A513, and A514 garnet paper product lines. Designed as a standard full-sheet abrasive for use with hand blocks and manual sanding applications on wood and similar soft surfaces.

Installation Notes

No mechanical installation is required for abrasive sheets. Fold or cut sheets to fit hand blocks, file holders, or sanding pads as needed. Always sand with the grain on wood surfaces to avoid cross-grain scratches that show through finish coats. Inspect sheets regularly during use and replace when the abrasive mineral shows visible wear or the sheet begins to load.

Technical Specifications

• Abrasive Type: Garnet
• Coat Type: Open Coat
• Grit: 150A
• Sheet Size: 9 inches x 11 inches
• Sheet Format: Full Sheet
• Compatible Series: A511, A513, A514
• Packaging Quantity: 100 sheets
• Unit of Measure: Each
• Minimum Order Quantity: 500

Standard Information

• Brand: NORTON
• Manufacturer Part Number: 662611-01490