Norton 66261055260 Deburring Wheel 10 in Silicon Carbide

Product Description

The NORTON 66261055260 is a convolute deburring wheel designed for aggressive edge finishing and surface conditioning on metal workpieces. Built with silicon carbide abrasive at a fine grade and density 8 with a hard density grade, this wheel delivers consistent stock removal and deburring performance. The 10-inch diameter and 1-inch face width make it well-suited for bench and pedestal grinder applications. It is rated for a maximum of 2,500 RPM and accepts a 5-inch center arbor hole. Licensed trade professionals and experienced metalworkers install and operate this type of wheel in production and maintenance grinding environments.

This convolute deburring wheel is intended for use on bench grinders and pedestal grinders in both shop and industrial settings. Typical applications include removing burrs from machined or stamped metal parts, light surface blending, and edge conditioning on ferrous and non-ferrous materials. The silicon carbide abrasive composition makes it appropriate for harder or more brittle workpiece materials where a sharp, friable abrasive is preferred.

Key Features

• Silicon carbide abrasive for effective cutting on hard and brittle materials
• Convolute wheel construction provides consistent density and controlled cut rate
• Fine grade, density 8 hard rating for aggressive deburring with controlled material removal
• 2,500 RPM maximum speed rating for bench and pedestal grinder compatibility
• 10-inch diameter with 1-inch face width for broad contact area on grinder arbors
• 5-inch center arbor hole fits standard bench and pedestal grinder spindle sizes

Compatibility

Designed for use with bench grinders and pedestal grinders accepting a 5-inch arbor hole and operating at or below 2,500 RPM.

Installation Notes

This wheel should be installed by a qualified operator familiar with abrasive wheel safety procedures. Always disconnect power to the grinder before mounting or removing any abrasive wheel. Verify that the grinder spindle speed does not exceed the 2,500 RPM maximum rating stamped on or associated with this wheel before operation. Inspect the wheel for cracks or damage before each use and follow ANSI B7.1 guidelines for safe mounting, guarding, and operation of abrasive wheels.