Norton 66261007628 Deburring Disc 6 in Very Fine Arbor

Product Description

The NORTON 66261007628 is a 6-inch diameter deburring disc designed to remove burrs, sharp edges, and surface irregularities left by cutting, drilling, or machining operations. It mounts via an arbor connection through a 1/4-inch center hole and is rated for a maximum speed of 4000 RPM. The Very Fine grade makes it well-suited for finishing passes where material removal must be controlled and surface quality matters. Metalworkers, fabricators, and maintenance technicians use this disc when a clean, finished edge is required without aggressive stock removal.

This deburring disc is used in metal fabrication shops, maintenance facilities, and light manufacturing environments. It is appropriate for finishing ferrous and non-ferrous metal workpieces after cutting or punching operations. The 6-inch diameter provides good coverage on flat or slightly contoured surfaces. Its Very Fine grade suits final deburring stages where the goal is a smooth, consistent edge rather than rapid material removal.

Key Features

• 6-inch disc diameter for broad surface coverage
• Very Fine grade for controlled, finish-quality deburring
• Arbor mount with 1/4-inch center hole for secure tool attachment
• 4000 RPM maximum speed rating for safe, controlled operation
• Suitable for removing sharp edges after drilling, cutting, or punching

Compatibility

Designed for use with arbor-mounted angle grinders, die grinders, or bench grinders that accept a 6-inch disc with a 1/4-inch arbor hole. Verify that your tool's spindle speed does not exceed the 4000 RPM rated maximum before use.

Installation Notes

Installation should be performed by a qualified metalworker or tooling technician familiar with abrasive disc safety. Always power down and disconnect the tool from its power source before mounting or removing the disc. Confirm the arbor and center hole sizes match before securing the disc, and inspect the disc for cracks or damage prior to each use. Follow ANSI B7.1 safety requirements for abrasive wheel mounting and operation.