Norton 66253464607 Cut-off Wheel 16 in Zirconia Alumina

Product Description

The NORTON 66253464607 is a Type 1 (01/41) reinforced cut-off wheel designed for high-demand cutting of steel and stainless steel. Built with a zirconia alumina abrasive and a resinoid bond, this wheel delivers consistent stock removal on hard ferrous materials. At 16 inches in diameter and 1/8 inch thick, it is sized for use with electric and gas-powered saws. The wheel is rated to a maximum of 4800 RPM and features side reinforcement for added structural integrity during cutting operations. It is part of the Railcut Norzon III product line, designed for demanding industrial cutting applications.

This wheel is suited for trade and industrial professionals working with structural steel, stainless steel pipe, rail, and similar ferrous stock. Its 16-inch diameter and arbor hole of 1 inch make it compatible with large-format electric and gas-powered cut-off saws commonly used in fabrication, rail maintenance, and heavy construction. The 30-grit zirconia alumina abrasive is aggressive enough for production-rate cutting while maintaining wheel life under continuous use.

Key Features

• Zirconia alumina abrasive for aggressive cutting on steel and stainless steel
• Type 1 (01/41) flat wheel profile for straight cut-off applications
• Resinoid bond provides durability and heat resistance during extended cuts
• Sides reinforced for improved structural integrity under lateral stress
• Rated to 4800 maximum RPM for use with electric and gas-powered saws
• Part of the Railcut Norzon III series for demanding cutting environments

Compatibility

Designed for use with electric and gas-powered saws equipped to accept a 16-inch diameter, 1-inch arbor cut-off wheel. Listed applications include steel and stainless steel cutting.

Installation Notes

Mounting and use of cut-off wheels should be performed by qualified personnel familiar with abrasive wheel safety standards, including ANSI B7.1 guidelines. Always inspect the wheel for cracks or damage before mounting and verify that the saw spindle speed does not exceed the 4800 RPM maximum rating. Power down and disconnect or disable the saw before changing wheels. Never force the wheel onto the arbor or use an adapter that alters the arbor fit.