Norton 66253464415 Cut-off Wheel 16 in Zirconia 24 Grit

Product Description

The NORTON 66253464415 is a Type 1 flat cut-off wheel engineered for high-speed cutting of steel and stainless steel with electric- or gas-powered saws. It measures 16 inches in diameter, 1/8 inch thick, and accepts a 1-inch arbor hole. The wheel is built with Zirconia Alumina abrasive grain at a 24-grit rating, bonded with a resinoid bond and reinforced on both sides for added structural integrity under load. Rated to a maximum of 4800 RPM, this wheel is part of the Railcut Norzon III Fast Cut product line, designed for aggressive, efficient cutting action in demanding field and shop environments.

This cut-off wheel is suited for trade professionals who cut structural steel, stainless steel pipe, rail, and heavy fabricated metal. The 16-inch diameter makes it a natural fit for large-diameter gas-powered abrasive saws and high-horsepower electric cut-off saws used in fabrication shops, rail maintenance operations, and heavy construction. The Zirconia Alumina grain structure is well matched to ferrous metals where fast stock removal and extended wheel life are priorities.

Key Features

• 16-inch diameter with 1/8-inch thickness and 1-inch arbor hole for compatibility with large-diameter abrasive saws
• Zirconia Alumina abrasive material with 24 grit for aggressive cutting action on steel and stainless steel
• Resinoid bond, Type 1 (01/41) flat profile for straight cutting applications
• Both sides reinforced for added wheel strength and safety at operating speed
• Rated to 4800 max RPM for use with electric and gas-powered saws
• Railcut Norzon III Fast Cut specification for high-performance cutting in heavy-duty applications

Compatibility

Designed for use with electric and gas-powered abrasive cut-off saws that accept a 16-inch diameter, 1-inch arbor wheel. Recommended for cutting steel and stainless steel.

Installation Notes

This wheel must be mounted and operated by qualified personnel familiar with abrasive wheel safety. Always power down and disconnect the saw before mounting or removing the wheel. Verify the saw spindle speed does not exceed the 4800 RPM maximum rating stamped on the wheel. Wear appropriate PPE including a face shield and gloves, and inspect the wheel for cracks or damage before each use in accordance with ANSI B7.1 safety standards.