Norton 66253122823 Cut-off Wheel 10in Aluminum Oxide 36 Grit

Product Description

The NORTON 66253122823 is a Type 1 (flat) resinoid-bonded aluminum oxide cut-off wheel designed for aggressive ferrous metal cutting on stationary abrasive saws and cut-off machines. At 10 inches in diameter and 3/32 inches thick, this wheel delivers fast, clean cuts through steel and stainless steel. The 36-grit aluminum oxide grain, hardness code T, and grain structure 4 combine to provide a controlled cut rate that holds up under sustained use. Both sides are reinforced for added safety at speeds up to 6110 RPM. The 5/8 inches arbor hole fits standard stationary cut-off machine spindles. This wheel is intended for installation and use by metalworking professionals and experienced tradespeople.

The 66253122823 is rated for cutting steel and stainless steel on stationary tools such as abrasive chop saws and cut-off machines. Its Type 1 flat profile makes it well suited for straight, plunge-style cuts in structural steel, pipe, rebar, and sheet stock. The reinforced construction supports full-depth cuts through hard ferrous materials where wheel integrity under load is critical. This wheel is not rated for handheld angle grinders; it is intended strictly for stationary equipment operating within the rated RPM.

Key Features

• Type 1 flat profile optimized for straight cuts on stationary cut-off machines
• Aluminum oxide abrasive grain rated for steel and stainless steel cutting
• Both sides reinforced for structural integrity at operating speed
• Resinoid bond provides consistent grain exposure throughout wheel life
• 6110 max RPM rated for safe use on standard stationary cut-off equipment
• 36 grit delivers aggressive stock removal on ferrous materials

Compatibility

Designed for use with stationary cut-off machines and abrasive saws equipped with a 5/8 inches arbor spindle. Rated for cutting steel and stainless steel. Not intended for handheld grinders.

Installation Notes

Installation should be performed by a qualified operator following the abrasive wheel manufacturer safety guidelines and ANSI B7.1 standards. Always power down and lock out the machine before mounting or removing a cut-off wheel. Inspect the wheel for cracks, chips, or damage before every use and do not mount a damaged wheel. Confirm the machine spindle speed does not exceed the 6110 RPM maximum rating marked on the wheel.