Norton 66252922985 Cut-off Wheel 7 in 60 Grit Aluminum Oxide

Product Description

The NORTON 66252922985 is a Type 1 (01/41) flat cut-off wheel designed for aggressive cutting of steel and stainless steel on stationary abrasive tools. It measures 7 inches in diameter and 1/32 inches thick, with a 1-1/4 inch arbor hole. The abrasive grain is aluminum oxide at 60 grit, bonded with shellac for controlled cutting action. The wheel carries a maximum speed rating of 5185 RPM and a hardness code of O. At 0.3 pounds, it is a lightweight consumable suited for fabrication shops, metal service centers, and trade professionals working with ferrous metals.

This cut-off wheel is intended for use with stationary tools such as bench-mounted or pedestal-mounted cut-off machines. It is well suited for production cutting of steel bar stock, structural steel, and stainless steel in industrial and fabrication environments. The 60-grit aluminum oxide grain delivers a balance of cut rate and wheel life on ferrous materials. The Type 1 flat profile is the standard geometry for stationary cut-off applications and mounts directly to machines with a 1-1/4 inch arbor.

Key Features

• 7 inches diameter with 1/32 inches thickness for fast, narrow kerf cuts
• 60-grit aluminum oxide abrasive for effective cutting on steel and stainless steel
• Shellac bond provides controlled cut with reduced heat buildup
• Type 1 (01/41) flat wheel geometry for stationary cut-off machines
• 5185 RPM maximum speed rating
• Hardness code O for consistent wheel performance on ferrous metals

Compatibility

Designed for use with stationary cut-off tools accepting a 7 inch diameter, 1/32 inch thick, Type 1 wheel with a 1-1/4 inch arbor hole. Rated for cutting steel and stainless steel.

Installation Notes

Installation should be performed by a qualified operator following the tool manufacturer's instructions and applicable ANSI B7.1 safety requirements for abrasive wheels. Always power down and disconnect the machine before mounting or removing the wheel. Inspect the wheel for cracks or damage before each use and never operate above the rated 5185 RPM. Ensure the machine arbor size matches the 1-1/4 inch hole before mounting.