Norton 66252922692 Cut-off Wheel 7in 60 Grit Aluminum Oxide

Product Description

The NORTON 66252922692 is a Type 1 flat cut-off wheel designed for use with stationary abrasive tools. It measures 7 inches in diameter, 1/8 inch thick, and accepts a 1-1/4 inch arbor hole. The abrasive material is aluminum oxide at 60 grit with a resinoid bond and an M hardness code, making it well-suited for aggressive cutting on ferrous metals. The wheel carries a maximum operating speed of 6,550 RPM. Licensed tradespeople and fabricators in metalworking, welding, and maintenance environments rely on this wheel for straight, repeatable cutoff work on both steel and stainless steel stock.

This cut-off wheel is rated for steel and stainless steel applications in stationary tool setups. It is a non-reinforced, Type 1 (01/41) flat profile wheel, appropriate for chop saws, abrasive cutoff machines, and similar bench-mounted equipment where a consistent 7-inch wheel diameter is required. The brown aluminum oxide grain at 60 grit provides a balance of cut rate and wheel life on mild and stainless steel workpieces commonly encountered in fabrication shops and industrial maintenance settings.

Key Features

• Aluminum oxide abrasive, 60 grit with grain structure 8 for consistent cut performance on steel and stainless steel
• Resinoid bond (specification 57A60-M8B) with M hardness code for controlled material removal
• Type 1 (01/41) flat wheel profile for straight cutoff operations
• Non-reinforced construction suited for stationary abrasive cutoff machines
• 6,550 RPM maximum operating speed
• 1-1/4 inch arbor hole fits common stationary cutoff machine spindles

Compatibility

Designed for use with stationary abrasive cutoff tools that accept a 7-inch diameter, 1-1/4 inch arbor wheel running at or below 6,550 RPM. Rated for cutting steel and stainless steel.

Installation Notes

Mounting and replacement of abrasive cut-off wheels should be performed by a qualified operator following the tool manufacturer's guard and flange requirements. Always power down and disconnect the machine before changing wheels. Verify that the machine's rated spindle speed does not exceed the wheel's 6,550 RPM maximum before operation. Eye protection, face shield, and appropriate PPE are required when operating abrasive cutting equipment.