Norton 66252922676 Cut-off Wheel 7 in Aluminum Oxide 36 Grit

Product Description

The NORTON 66252922676 is a Type 1 flat cut-off wheel designed for aggressive cutting on steel and stainless steel with stationary grinders. The wheel measures 7 inches in diameter and 1/16 inches thick, with a 1-1/4 inches arbor hole. It uses an aluminum oxide abrasive grain at 36 grit, bonded with a resinoid bond and reinforced on both sides for added durability under load. The maximum rated speed is 8730 RPM. At 0.2 pounds, it is a lightweight consumable suited for production cutting and fabrication environments where straight, consistent cuts are required.

This cut-off wheel is intended for use with stationary grinders in metalworking applications. It is well suited for structural steel cutting, stainless steel tubing, flat bar, and angle iron in fabrication shops, maintenance facilities, and industrial settings. The 36-grit aluminum oxide grain provides fast stock removal on ferrous and stainless materials. Both sides of the wheel are reinforced, which helps resist lateral stress during cuts and extends wheel life in demanding conditions.

Key Features

• 7 inches diameter, 1/16 inches thick Type 1 flat profile for straight cuts
• Aluminum oxide abrasive, 36 grit, for fast cutting on steel and stainless steel
• Resinoid bond with dual-side reinforcement for structural integrity under load
• 1-1/4 inches arbor hole fits standard stationary grinder spindles
• 8730 RPM maximum rated speed
• Hardness code T and grain structure 4 for consistent cut performance

Compatibility

Designed for use with stationary grinders. Rated for cutting steel and stainless steel. Confirm spindle speed does not exceed the 8730 RPM maximum rating before mounting.

Installation Notes

Cut-off wheels must be installed and operated by qualified personnel following ANSI B7.1 safety standards for the use, care, and protection of abrasive wheels. Always power down and lock out the grinder before mounting or removing a wheel. Inspect the wheel for cracks or chips before each use, and never use a wheel that has been dropped or damaged. Do not exceed the maximum RPM rating marked on the wheel.