Norton 66252922673 Cut-off Wheel 7 in Aluminum Oxide

Product Description

The NORTON 66252922673 is a Type 1 resinoid-bonded aluminum oxide cut-off wheel designed for aggressive cutting on steel and stainless steel. Measuring 7 inches in diameter and 1/16 inches thick with a 5/8 inches arbor hole, this wheel delivers thin-kerf cuts that minimize material loss and heat buildup. The 36-grit aluminum oxide grain with a hardness code of T and grain structure rating of 4 provides a consistent, controlled cut. Both sides are reinforced for added structural integrity during high-speed operation. Rated to 8730 RPM, it is suited for use with circular saws in demanding trade and fabrication environments.

This cut-off wheel is intended for cutting steel and stainless steel in fabrication shops, maintenance facilities, and on job sites where a circular saw is the primary cutting tool. Its thin 1/16 inches profile reduces drag and heat, making it a practical choice for repetitive cuts on structural steel, pipe, angle iron, and sheet stock. The resinoid bond provides durability across a range of ferrous materials encountered in mechanical, plumbing, HVAC, and general trade work.

Key Features

• 7 inches diameter with 1/16 inches thin-kerf profile minimizes heat and material waste
• Aluminum oxide abrasive at 36 grit for fast, consistent cutting on ferrous metals
• Resinoid bond with Type 1 flat wheel geometry for straight cutting applications
• Both sides reinforced for structural integrity at high RPM
• 8730 maximum RPM rating compatible with standard circular saw speeds
• 5/8 inches arbor hole fits common circular saw spindle sizes

Compatibility

Designed for use with circular saws on steel and stainless steel applications. Verify that the saw spindle speed does not exceed 8730 RPM and that the arbor accepts a 5/8 inches hole before mounting.

Installation Notes

Installation and wheel changes should be performed by qualified personnel following ANSI B7.1 safety standards for abrasive wheel use. Always power down and disconnect the saw before mounting or removing the wheel. Inspect the wheel for cracks or damage before each use and never operate above the rated maximum RPM. Appropriate eye protection, face shield, and gloves are required during cutting operations.