Norton 66252839100 8 Inch Carbon Steel Crimped Wheel Brush

Product Description

The NORTON 66252839100 is a crimped-wire wheel brush designed for aggressive surface preparation, deburring, and cleaning on metal workpieces. It features a carbon steel fill material with a coarse grade wire configuration and mounts via a standard arbor hole. The brush runs at a maximum of 4,000 RPM, making it suitable for use on bench grinders and similar stationary equipment. With an 8-inch outside diameter and a 1-inch face width, it covers a practical working surface for production and maintenance applications. No shank is included — the 5/8-inch arbor hole provides direct spindle mounting.

This wheel brush is well suited for industrial maintenance, fabrication shops, and general metalworking environments where heavy-duty wire brushing is required. Typical applications include weld spatter removal, rust and scale stripping, and surface conditioning on steel and iron parts. It is installed on bench grinders or pedestal grinders and is a common tool for both production and job-site maintenance work. Sold individually, with a minimum order quantity of 5 units per order.

Key Features

• 8-inch outside diameter with 1-inch face width for broad surface coverage
• Carbon steel crimped wire fill rated for coarse-grade surface work
• 5/8-inch arbor hole for direct mount on standard bench and pedestal grinders
• Rated to 4,000 RPM maximum for safe stationary machine use
• 1-9/16-inch trim length provides extended wire contact and flex
• No encapsulation and no shank — straightforward arbor-mount configuration

Compatibility

Designed as an arbor-hole-mount wheel brush for bench grinders and pedestal grinders accepting a 5/8-inch arbor and accommodating an 8-inch wheel diameter. Verify maximum RPM rating of the grinder does not exceed 4,000 RPM before installation.

Installation Notes

Installation should be performed by a qualified operator familiar with abrasive wheel safety procedures. Power down and lock out the grinder before mounting or removing the brush. Confirm the machine spindle speed does not exceed the 4,000 RPM maximum rating marked on the brush. Always dress with appropriate PPE including eye protection and gloves when operating wire wheel brushes, and inspect the brush for damaged or broken wires before each use.