Norton 66252837838 Cut-off Wheel 12 in Aluminum Oxide

Product Description

The NORTON 66252837838 is a 12-inch diameter Type 1 (01/41) resinoid-bonded aluminum oxide cut-off wheel designed for aggressive metal cutting applications. At 1/8 inch thick with a 1-inch arbor hole, it mounts on electric or gas-powered saws and delivers straight, clean cuts through ferrous and non-ferrous metals. The wheel is double-layer reinforced and carries a maximum operating speed of 6,300 RPM. Rated at 24 grit, it removes material quickly on demanding job sites where production cutting speed matters. Licensed tradespeople in fabrication, construction, and maintenance use this wheel in high-cycle cutting operations.

This cut-off wheel is suited for cutting steel and stainless steel in residential, commercial, and industrial settings. It is built for use with electric and gas-powered abrasive saws and chop saws that accept a 12-inch, 1-inch arbor wheel. The Gemini Metal specification indicates it is formulated specifically for metal stock, structural shapes, pipe, and tubing. It is a single-wheel package, making it a direct replacement buy for job site restocking.

Key Features

• 12-inch diameter with 1/8-inch cutting thickness for straight, minimal-kerf cuts
• Aluminum oxide abrasive grain with resinoid bond for consistent metal cutting performance
• Two-layer reinforced construction for added wheel integrity at operating speed
• 6,300 RPM maximum operating speed rated for high-speed abrasive saws
• Type 1 (01/41) flat wheel profile for straight cut-off use
• Gemini Metal formulation rated for steel and stainless steel applications

Compatibility

Designed for use with electric and gas-powered abrasive cut-off saws and chop saws that accept a 12-inch diameter, 1-inch arbor hole Type 1 cut-off wheel. Rated for cutting steel and stainless steel.

Installation Notes

Mount and replace cut-off wheels only while the saw is fully powered off and the power source is disconnected or locked out per OSHA lockout/tagout procedures. Verify the saw arbor size matches the 1-inch hole before mounting and confirm the machine RPM rating meets or exceeds 6,300 RPM. Never exceed the maximum RPM marked on the wheel, and always inspect the wheel for cracks or damage before each use. Wear appropriate PPE including a face shield, gloves, and hearing protection during operation.