Norton 61463609094 Mounted Point A11 60 Grit 2in

Product Description

The NORTON 61463609094 is an aluminum oxide mounted point in the A11 pointed tree profile, designed for precision grinding, deburring, and surface blending in hard-to-reach areas. At 60 grit with a medium grade, this mounted point removes material efficiently while leaving a consistent surface finish. The 1/4 inch shank fits standard die grinders and rotary tools used by machinists, fabricators, and maintenance technicians. Aluminum oxide is a general-purpose abrasive well suited for ferrous metals, hardened steel, and cast iron. The pointed tree geometry allows access to contoured surfaces, slots, and internal radii that flat wheels cannot reach.

This mounted point is used in metal fabrication shops, tool and die operations, automotive repair, and general maintenance environments. Typical applications include weld blending, port work, cavity cleaning, and edge chamfering on steel and iron components. It is well suited for both bench-mounted operations and handheld die grinder work in tight clearance areas. The 2 inch head thickness provides adequate grinding face for moderate material removal tasks without excessive wheel deflection.

Key Features

• A11 pointed tree profile for access to contoured surfaces, slots, and internal cavities
• 60 grit medium grade balances material removal rate with surface finish quality
• Aluminum oxide abrasive suitable for ferrous metals, hardened steel, and cast iron
• 1/4 inch shank diameter compatible with standard die grinders and rotary tools
• 2 inch head thickness provides substantial grinding contact area

Compatibility

Designed as a standard 1/4 inch shank mounted point for use with die grinders and rotary tools that accept 1/4 inch collets, commonly used in metal fabrication and maintenance grinding applications.

Installation Notes

Mounted points should be installed by a qualified machinist or technician familiar with abrasive tooling and rotary tool operation. Verify the spindle speed rating of the die grinder does not exceed the maximum RPM rating of the mounted point before use. Inspect the wheel for cracks or damage before mounting, and never use a damaged abrasive. Wear appropriate eye and face protection per ANSI B7.1 standards when operating grinding equipment.