Norton 076607-60655 Wide Belt 43x85 in 150 Grit 5 Pack

Product Description

The NORTON 076607-60655 is an aluminum oxide wide sanding belt built on an X-weight cloth backing for demanding material removal and finishing applications. At 43 x 85 inches, this is a large-format belt sized for industrial and commercial wide-belt sanders. The 150 grit aluminum oxide abrasive delivers consistent cut and finish on wood, composites, and similar materials. X-weight cloth backing provides the rigidity and tensile strength needed to run at high speeds without tracking failure or edge curl. These belts are sold in a minimum quantity of 5 per order.

Wide-belt sanders running 43 x 85 inch belts are common in cabinet shops, millwork facilities, furniture manufacturing, and flooring operations. This belt is well suited for finish sanding passes where the goal is a smooth, even surface prior to coating or assembly. At 150 grit, it sits in the fine-finishing range, removing light stock and preparing surfaces for staining or sealing. Industrial maintenance shops and production floor operators are the primary installers and users of belts in this size class.

Key Features

• Aluminum oxide abrasive for reliable cut rate on wood and composite surfaces
• X-weight cloth backing for high tensile strength and heat resistance during extended runs
• 150 grit for fine finishing and pre-coat surface preparation
• 43 x 85 inch format fits large industrial wide-belt sanders
• Sold in packs of 5 to support production-volume use

Compatibility

Designed for use in industrial wide-belt sanding machines that accept a 43 x 85 inch abrasive belt.

Installation Notes

Wide sanding belts should be installed by qualified machine operators following the equipment manufacturer's tracking and tensioning procedures. Power down and lock out the sander before changing belts. Inspect the platen and contact drum for wear before seating a new belt. Allow the belt to run briefly at low feed speed before applying full workpiece pressure to confirm proper tracking.

Technical Specifications

• Abrasive Type: Aluminum Oxide
• Backing: X-Weight Cloth
• Grit: 150
• Belt Width: 43 inches
• Belt Length: 85 inches
• Quantity per Order: 5 belts
• Unit of Measure: Each

Standard Information

• Brand: NORTON
• Manufacturer Part Number: 076607-60655