Norton 076607-60652 Wide Belt 43x85 in 80 Grit 3 Pack

Product Description

The NORTON 076607-60652 is an aluminum oxide wide abrasive belt built on an X-weight cloth backing for demanding material removal applications. The X-weight cloth construction delivers the stiffness and tensile strength needed to handle aggressive stock removal on wide belt sanders without tracking failure or premature breakdown. At 80 grit, this belt is suited for rapid surface leveling, weld blending, and coarse stock removal on wood, metal, and composite panels. Each order ships as a package of 3 belts, making it practical to keep spares on hand during production runs or on-site finishing work.

This wide belt is designed for use on industrial wide belt sanding machines common in cabinet shops, millwork operations, metal fabrication facilities, and floor sanding applications. The 43 x 85 inch format fits wide platen and contact-drum sanders found in production finishing environments. At 80 grit, it is typically deployed as an initial or intermediate cut before progression to finer grits. Woodworking shops, metal fab technicians, and flooring contractors are the primary installers and end users of this product.

Key Features

• Aluminum oxide abrasive mineral provides consistent cut rate and durability across wood and metal substrates
• X-weight cloth backing resists tearing and stretching under high tension and feed pressure
• 80 grit designation suited for aggressive stock removal and coarse surface prep
• 43 x 85 inch dimensions fit standard industrial wide belt sanding machines
• Sold in a package of 3 belts to support continuous production use

Compatibility

Designed for use on industrial wide belt sanding machines that accept a 43 x 85 inch abrasive belt format, commonly found in woodworking, metal fabrication, and flooring production environments.

Installation Notes

Installation should be performed by a qualified operator familiar with the specific wide belt sander in use. Always power down and lock out the machine before changing belts. Inspect the belt for proper tracking direction arrows before mounting, and confirm tensioner and tracking adjustments are set per the machine manufacturer guidelines before starting the sander. Allow the machine to run unloaded briefly after a belt change to verify stable tracking before engaging a workpiece.

Technical Specifications

• Abrasive Type: Aluminum Oxide
• Backing: X-Weight Cloth
• Grit: 80
• Belt Width: 43 inches
• Belt Length: 85 inches
• Package Quantity: 3 belts
• Unit of Measure: Each
• Minimum Order Quantity: 3

Standard Information

• Brand: NORTON
• Manufacturer Part Number: 076607-60652