Norton 076607-60503 Wide Belt 37x60 in 100 Grit Aluminum Oxide

Product Description

The NORTON 076607-60503 is an aluminum oxide wide abrasive belt built on an X-weight cloth backing. X-weight cloth is a heavy, durable substrate that resists tearing and flexing under the high tension and feed rates common in wide-belt sanding applications. At 100 grit, this belt delivers consistent medium-stock removal and surface preparation, making it well suited for leveling, blending, and smoothing operations across wood, composites, and similar materials. Licensed trades and production shop operators rely on this belt construction for demanding through-feed and stationary wide-belt machine work where belt integrity and consistent cut rate matter.

This belt is sized at 37 x 60 inches, fitting wide-belt sanders commonly found in cabinet shops, millwork facilities, furniture manufacturing operations, and industrial finishing lines. The 100-grit aluminum oxide abrasive is appropriate for initial smoothing after rough milling, preparation of panel surfaces before finishing, and blending of glue lines or surface irregularities. Belts are sold in a minimum quantity of 5 units per order, which aligns with normal shop consumption cycles for production-grade sanding equipment.

Key Features

• Aluminum oxide abrasive grain for consistent cut and long service life on wood and composite surfaces
• X-weight cloth backing provides high tensile strength and resistance to tearing under wide-belt machine tension
• 100 grit delivers medium stock removal suitable for surface leveling and pre-finish blending
• 37 x 60 inch format fits standard wide-belt sander configurations in production and millwork environments
• Sold in quantities of 5 belts, matching typical shop restocking cycles

Compatibility

Designed for use on wide-belt sanding machines that accept 37 x 60 inch abrasive belts. Verify machine drum and platen dimensions against belt size before installation.

Installation Notes

Wide abrasive belts should be installed by operators familiar with wide-belt sanding equipment setup and tensioning procedures. Power down and lockout the machine before changing belts. Inspect the belt for cracks, edge tears, or splice separation before mounting, and confirm belt tracking alignment before resuming operation. Follow the machine manufacturer's tension and tracking guidelines to avoid premature belt failure or workpiece damage.

Technical Specifications

• Abrasive Material: Aluminum Oxide
• Backing Type: X-Weight Cloth
• Grit: 100
• Belt Size: 37 x 60 inches
• Minimum Order Quantity: 5
• Unit of Measure: Each

Standard Information

• Brand: NORTON
• Manufacturer Part Number: 076607-60503