Norton 076607-60085 Wide Belt Ao X Cloth 6x108 150 Grit

Product Description

The NORTON 076607-60085 is an aluminum oxide abrasive wide belt built on an X weight cloth backing. X weight cloth is a heavy, durable substrate rated for high-tension wide-belt machines used in industrial sanding and finishing applications. Aluminum oxide is a tough, self-fracturing abrasive grain that maintains a sharp cutting edge throughout the belt's service life. At 150 grit, this belt is suited for fine stock removal and surface preparation prior to finishing. The 6-inch by 108-inch format is a standard size for wide-belt sanders used in woodworking, metal fabrication, and composite surface work.

This belt is intended for use on wide-belt stationary sanding machines in production shop and industrial environments. It is well-suited for final dimensioning passes on hardwood and softwood panels, light deburring of metal stock, or surface leveling of composite and laminate materials. The 150 grit cut is appropriate for intermediate-to-finish sanding stages where uniform scratch pattern and surface consistency are required before coating or finishing.

Key Features

• Aluminum oxide grain for durable, self-sharpening cutting action across extended use cycles
• X weight cloth backing provides high tensile strength for demanding wide-belt machine applications
• 150 grit rating suited for fine stock removal and pre-finish surface preparation
• 6 inches by 108 inches format compatible with standard industrial wide-belt sander configurations
• Sold individually (each) with a minimum order quantity of 20 units

Compatibility

Designed as a standard replacement abrasive wide belt for industrial wide-belt sanding machines that accept a 6-inch by 108-inch belt. Confirm platen and contact-drum specifications on your machine before installation.

Installation Notes

Wide belts of this size are installed by trained machine operators or maintenance technicians familiar with wide-belt sander operation. Power down and lockout the sanding machine before changing belts, per OSHA lockout/tagout requirements. Verify belt tracking tension settings on the machine after installation and before resuming production. Inspect the belt for defects, tears, or splice irregularities before placing the machine under load.

Technical Specifications

• Abrasive Grain: Aluminum Oxide
• Backing Type: X Weight Cloth
• Grit: 150
• Belt Width: 6 inches
• Belt Length: 108 inches
• Unit of Measure: Each
• Minimum Order Quantity: 20

Standard Information

• Brand: NORTON
• Manufacturer Part Number: 076607-60085