Norton 076607-60064 Aluminum Oxide Wide Belt 6x89 120 Grit

Product Description

The NORTON 076607-60064 is an aluminum oxide wide sanding belt built on an X-weight cloth backing, designed for demanding material removal and finishing operations on wide belt sanders. Measuring 6 inches by 89 inches, this belt runs at 120 grit, placing it in the medium-fine range suited for stock removal with a refined surface finish. Aluminum oxide abrasive grain offers consistent cut and durability across ferrous metals, hardwoods, softwoods, composites, and MDF. X-weight cloth backing provides the rigidity and tensile strength needed to handle the tension and heat generated in industrial and production-floor sanding applications. Licensed tradespeople and shop operators rely on this belt for demanding throughfeed and stroke sanding tasks.

This wide belt is intended for use in stationary wide belt sanding machines that accept a 6-inch by 89-inch belt. Typical applications include furniture manufacturing, cabinet production, flooring refinishing shops, and millwork facilities where consistent surface preparation across large panel surfaces is required. The 120 grit designation makes it appropriate for intermediate to finish sanding passes, blending prior scratch patterns and preparing surfaces for staining, sealing, or coating. It is sold in a packaging quantity of 10 belts per unit, making it practical for continuous production use.

Key Features

• Aluminum oxide abrasive grain delivers reliable cut rate and long service life across wood and metal substrates
• X-weight cloth backing provides high tensile strength and heat resistance under production tension loads
• 120 grit rating suits intermediate and pre-finish sanding passes on panels, doors, and flat stock
• 6 inches by 89 inches size fits wide belt sanders common in furniture, cabinetry, and millwork operations
• Sold in a quantity of 10 belts per package for production-level replenishment

Compatibility

Designed as a replacement wide sanding belt for stationary wide belt sanding machines that accept a 6-inch by 89-inch belt size. Confirm machine belt specifications before installation.

Installation Notes

Wide sanding belts should be installed by experienced shop personnel familiar with wide belt sander operation and belt tensioning procedures. Power down and lockout the machine before changing belts. Inspect the belt for proper tracking direction, as most belts are directional and the arrow on the inner surface must align with the machine's drive rotation. Allow the machine to run briefly at low load after installation to confirm tracking before resuming production.

Technical Specifications

• Abrasive Material: Aluminum Oxide
• Backing Type: X-Weight Cloth
• Grit: 120
• Belt Width: 6 inches
• Belt Length: 89 inches
• Package Quantity: 10 belts
• Minimum Order Quantity: 20
• Unit of Measure: Each

Standard Information

• Brand: NORTON
• Manufacturer Part Number: 076607-60064