Norton 076607-60058 Wide Sanding Belt 6x89 36 Grit

Product Description

The NORTON 076607-60058 is an aluminum oxide wide sanding belt built on an X-weight cloth backing for demanding material removal applications. The coarse 36 grit rating makes it well-suited for aggressive stock removal on wood, metal, and composite surfaces. X-weight cloth backing delivers the stiffness and tear resistance required for wide-belt machine operation at sustained feed rates. At 6 inches wide and 89 inches in length, this belt fits wide-belt sanders commonly used in production finishing and heavy surface prep environments. Sold in a package quantity of 10 belts, this SKU supports shop stocking rather than single-unit consumption.

This belt is used in industrial and production woodworking, metal fabrication, and surface preparation settings. Common applications include leveling glue joints, removing mill marks, and initial flattening passes on lumber, panel products, and fabricated metal parts. It is typically operated on stationary wide-belt sanding machines found in cabinet shops, millwork facilities, and metal shops. The coarse grit and robust cloth backing handle high-pressure, high-temperature conditions generated by wide-belt equipment running continuous cycles.

Key Features

• Aluminum oxide abrasive grain for consistent cutting on wood, metal, and composites
• 36 grit coarse rating optimized for aggressive stock removal and surface leveling
• X-weight cloth backing provides high tensile strength and resistance to tearing under machine tension
• 6 inch x 89 inch dimensions sized for wide-belt sanding machines
• Packaged in quantities of 10 to support production shop inventory

Compatibility

Designed for use on stationary wide-belt sanding machines that accept a 6 inch x 89 inch belt. Verify your machine's platen and roller specifications before installation to confirm belt length and width compatibility.

Installation Notes

Wide sanding belts should be installed by a qualified operator following the machine manufacturer's tensioning and tracking procedures. Always power down and lock out the sanding machine before changing belts. Inspect the platen, rollers, and contact drum for wear or debris before loading a new belt. Allow the belt to run at operating speed without load for a brief break-in period to confirm proper tracking before introducing workpieces.

Technical Specifications

• Abrasive Material: Aluminum Oxide
• Backing Type: X-Weight Cloth
• Grit: 36
• Belt Width: 6 inches
• Belt Length: 89 inches
• Package Quantity: 10 belts
• Minimum Order Quantity: 20

Standard Information

• Brand: NORTON
• Manufacturer Part Number: 076607-60058