Norton 076607-01512 Garnet Abrasive Sheets 180A Grit

Product Description

The NORTON 076607-01512 is a full-size garnet abrasive sheet designed for hand sanding and finishing applications across wood, paint, and similar surfaces. Built on a paper backing with an open-coat construction, these sheets measure 9 inches x 11 inches and are graded at 180A grit — a fine grit suited for final-pass smoothing, surface prep before finishing, and light material removal. The open-coat design spaces abrasive grains to reduce loading and extend usable sheet life on resinous or soft materials. These sheets are drawn from the A511, A513, and A514 product series within the Norton garnet line.

These abrasive sheets are used in residential and light commercial finishing work, furniture making, cabinetry, and woodworking shops. At 180A grit, they are appropriate for between-coat sanding, final prep before stain or topcoat application, and smoothing rough stock. The standard 9 inches x 11 inches format fits most hand sanding blocks and can be cut or folded to suit smaller work areas. Contractors, finish carpenters, and woodworking trades use this format for high-volume finishing tasks where consistent scratch pattern and surface quality matter.

Key Features

• 180A fine grit rating for final-pass smoothing and pre-finish surface preparation
• Open-coat construction reduces grain loading on soft and resinous materials
• Garnet abrasive mineral — natural, friable grain appropriate for wood sanding
• Standard 9 inches x 11 inches full-sheet format compatible with hand sanding blocks
• Paper backing suitable for hand sanding and light machine use
• Compatible with A511, A513, and A514 series applications

Compatibility

Designed as a direct-use abrasive sheet for hand sanding and finishing applications consistent with Norton garnet A511, A513, and A514 series usage. The 9 inches x 11 inches format is a standard full-sheet size compatible with most hand blocks and sanding frames.

Installation Notes

These sheets are installed by hand or fitted to a sanding block — no power tools required. Always sand with the grain direction on wood surfaces to minimize cross-grain scratches. Keep sheets dry during storage to prevent curling of the paper backing. Worn or loaded sheets should be replaced promptly to maintain consistent scratch pattern and avoid surface damage before finishing coats are applied.

Technical Specifications

• Abrasive Type: Garnet
• Series: A511, A513, A514
• Backing: Paper, Open Coat
• Sheet Size: 9 inches x 11 inches
• Grit: 180A
• Weight: 2.5 pounds

Standard Information

• Brand: NORTON
• Manufacturer Part Number: 076607-01512