Norgren D1025C-CY Poppet Solenoid Valve 3/4 Inch Npt

Product Description

The NORGREN D1025C-CY is a mechanically operated poppet valve with a solenoid actuator, designed for directional control in pneumatic and fluid systems. It features a 2-position, normally closed (NC) configuration with 3/4 inch NPT inlet and outlet ports, a Cv rating of 5.4, and a working pressure range up to 30 psi (2.07 bar). The valve handles temperatures from -20 degrees F to 120 degrees F, making it suitable for a wide range of industrial environments. It is installed by industrial maintenance technicians, pipefitters, and pneumatic system specialists working on automated control systems.

The D1025C-CY is suited for industrial pneumatic and fluid control applications where a 3-port, 2-position normally closed directional valve is required. Typical installations include automated machinery, process control systems, and compressed air distribution lines where positive shut-off and reliable solenoid actuation are critical. The poppet design provides a bubble-tight seal and is well-suited for environments where leak-free operation and cycle durability are priorities.

Key Features

• Poppet valve design provides positive, leak-resistant shut-off in normally closed position
• Cv rating of 5.4 supports adequate flow capacity for 3/4 inch line applications
• 3/4 inch NPT inlet and outlet ports for standard pipe thread connections
• 3-port, 2-position configuration for directional control of pneumatic or fluid media
• Operating temperature range from -20 degrees F to 120 degrees F
• Maximum working pressure of 30 psi (10.3 bar) for compatibility with standard industrial pneumatic systems

Compatibility

Designed as an OEM-style directional control valve for industrial pneumatic and fluid systems requiring a 3-port, 2-position normally closed poppet solenoid valve with 3/4 inch NPT connections.

Installation Notes

Installation should be performed by a qualified pipefitter or industrial maintenance technician familiar with pneumatic and fluid control systems. De-energize the system and relieve all line pressure before removing or installing the valve. Verify that the supply medium, pressure, and temperature are within the rated specifications before commissioning. Follow applicable local codes and system design standards when integrating into automated control circuits.