Norgren C24260218 Push-to-connect Adapter 5/32in Od Brass

Product Description

The NORGREN C24260218 is a straight push-to-connect adapter fitting designed for inline tube-to-female NPT connections in pneumatic and fluid-handling systems. Constructed from brass, it accepts 5/32 inch outside diameter tubing on both tube ports and connects to a 1/8 inch NPTF female threaded port at the center. The fitting is rated for a maximum working pressure of 150 psi and operates across a temperature range of 0 degrees F to 175 degrees F. An integrated nitrile O-ring provides a reliable seal at the tube interface. At 1.09 inches in overall length and 0.022 pounds, it is compact enough for tight panel or manifold installations. Plumbers, HVAC technicians, and pneumatic system installers work with this type of fitting regularly.

This adapter is suited for residential and light commercial pneumatic control lines, instrument air tubing, and low-pressure fluid distribution systems where a straight inline transition from push-to-connect tubing to a female NPT port is required. Typical applications include control panel pneumatic circuits, compressed air branch connections, and instrument tubing runs where space is limited and a secure, tool-free tube insertion is preferred at the tube ends.

Key Features

• Straight push-to-connect adapter accepts 5/32 inch OD tubing on both tube ports
• 1/8 inch NPTF female thread for leak-resistant tapered thread engagement
• Brass construction for corrosion resistance in air and compatible fluid service
• 150 psi maximum working pressure rating
• Nitrile O-ring seal at tube interface for reliable hold and easy tube release
• Compact 1.09 inch overall length suited for dense plumbing layouts

Compatibility

Designed as an OEM-style push-to-connect adapter for pneumatic and low-pressure fluid systems using 5/32 inch OD tubing with 1/8 inch NPTF female ported components.

Installation Notes

This fitting is installed by licensed HVAC technicians, pipefitters, or pneumatic system technicians. Depressurize and isolate the system before disconnecting or installing any push-to-connect fitting. Ensure tubing ends are cut cleanly and squarely with no burrs before insertion, as irregular cuts can compromise the O-ring seal. NPTF threads should be engaged carefully to avoid cross-threading; consult applicable codes such as the IFGC or IPC for pneumatic and fluid piping installation requirements in your jurisdiction.