Norgren C02670618 Swivel Tee Adapter 1/8 Bspp Brass

Product Description

The NORGREN C02670618 is a brass push-to-connect swivel tee adapter fitting designed for general-purpose pneumatic and fluid-handling line connections. It features a tube-to-male-to-tube-to-male BSPP configuration, allowing a 6 mm outside diameter tube to branch off a 1/8 inch BSPP male threaded port in a tee arrangement. Rated to 150 psi maximum working pressure and suitable for operating temperatures from 0 degrees F to 175 degrees F, this fitting handles a broad range of shop-air and low-pressure fluid applications. The nitrile O-ring provides a reliable seal at the push-to-connect interfaces. Installed by plumbers, HVAC technicians, and pneumatic system technicians.

The C02670618 is suited for general-purpose pneumatic lines, light-duty fluid distribution, and instrumentation tubing circuits in both residential and light commercial settings. The swivel tee design simplifies alignment during installation, reducing stress on connected tubing runs. The 1/8 inch BSPP thread engages standard British Standard Parallel Pipe ported components, while the push-to-connect ports accept 6 mm OD tubing without additional tooling. Typical applications include compressed air distribution panels, control line assemblies, and pneumatic actuator supply circuits.

Key Features

• Push-to-connect ports accept 6 mm OD tubing for tool-free tube insertion and release
• 1/8 inch BSPP male thread for direct engagement with BSPP-ported valves and manifolds
• 150 psi maximum working pressure rating for pneumatic and low-pressure fluid service
• Operating range of 0 degrees F to 175 degrees F suits most shop and field environments
• Nitrile O-ring seals for reliable performance in air and general-purpose fluid media
• Brass construction provides corrosion resistance in typical compressed-air and water service

Compatibility

Designed as an OEM-style fitting for general-purpose pneumatic and fluid-handling systems using 6 mm OD tubing and 1/8 inch BSPP ported components.

Installation Notes

Installation should be performed by a qualified pneumatic systems technician or licensed plumber familiar with BSPP thread engagement and push-to-connect fittings. Depressurize and isolate the line fully before removing or installing any fitting. Ensure tubing is cut square and deburred before inserting into the push-to-connect port to achieve a proper seal. Verify thread type before assembly, as BSPP and NPT threads are not interchangeable and cross-threading will damage the fitting.