Norgren A1015C-CY1W2 Poppet Solenoid Valve 3/4 in Npt

Product Description

The NORGREN A1015C-CY1W2 is a mechanically operated poppet valve with a solenoid actuator, designed for pneumatic or fluid control applications in industrial and commercial systems. It features a 2-position, normally closed (NC) configuration with 3/4-inch NPT inlet and outlet ports and a Cv rating of 6.5, allowing substantial flow capacity through the valve body. Working pressure is rated from 30 psi minimum to a maximum of 150 psi (10.3 bar). The operating temperature range runs from -20 degrees F to 120 degrees F, making it suitable for a wide range of environmental conditions. Licensed mechanical and instrumentation technicians typically install and service this valve type.

This valve is suited for industrial process lines, HVAC pneumatic control systems, and automated fluid handling equipment where a 2-position solenoid-actuated shutoff or directional control is required. The 3/4-inch NPT port sizing fits standard piping commonly used in commercial and light industrial installations. The normally closed configuration ensures the valve defaults to a closed state when the solenoid is de-energized, providing a safe fail-state for most process applications.

Key Features

• Poppet valve design with solenoid actuator for reliable 2-position control
• Normally closed (NC) configuration — defaults closed when de-energized
• 3/4-inch NPT inlet and outlet for standard pipe compatibility
• Cv rating of 6.5 for strong flow capacity
• Operating range of -20 degrees F to 120 degrees F
• Maximum working pressure of 10.3 bar (150 psi equivalent per bar rating)
• Compact black body construction rated for demanding service environments

Compatibility

Designed as an OEM-style solenoid poppet valve for industrial fluid and pneumatic control systems requiring a 3/4-inch NPT 2-position normally closed valve with solenoid actuation.

Installation Notes

Installation should be performed by a qualified mechanical or instrumentation technician. Depressurize the system and isolate all fluid or air supply lines before removing or installing the valve. Verify that inlet and outlet port orientation matches system flow direction prior to final installation. Follow applicable local mechanical codes and manufacturer torque guidance for NPT fittings to avoid thread damage or leaks.